Get matched with top electricians in Galena, KS

Yes, tamper-resistant outlets are designed to be safe for use in homes with children. They feature a spring-loaded shutter that blocks the electrical slots when not in use, which helps protect children from electric shock if they try to insert an object. While they are the safest option available and highly effective, it's important to note that few things are truly 'childproof.' Children may still try to imitate adults by inserting a plug. For this reason, it's best to use tamper-resistant outlets over less effective solutions like plastic covers, which can be removed or pose a choking hazard. Always supervise young children around any electrical outlets or devices.

Yes, one wire is always hot on the 3-way switch, meaning it carries the electricity from the power source to the switch. If you have a 3-wire cable in your home, you have two hot wires, or line wires, coming from the power source. Typically, you’d connect the hot black wire from the power source to the traveler wire and the hot red wire from the power source to the first 3-way switch. For the second 3-way switch, you’d then connect the hot black traveler wire to the switch.

Yes, pool pumps use a significant amount of electricity, making them one of the biggest energy consumers in a home. A pool pump can use up to three times as much electricity as a refrigerator. Typically, a residential pool pump consumes about 1 kilowatt-hour (kWh) for every hour it runs. Because pumps often need to run for about eight hours a day to properly filter the water, this can add up to an annual consumption of 3,000 to 5,000 kWh, which can cost between $480 and $800 per year based on average electricity rates.

The amount of electricity your pump uses depends on its size, energy efficiency, and daily run time. To lower your energy consumption, you can choose an energy-efficient or variable-speed pump, ensure it is correctly sized for your pool, and run it only for the minimum time required to keep the water clean.

Upgrading your amp service could possibly be a solution to tripped breakers. Circuit breakers in an electrical panel trip as a safety measure when something goes wrong with the current, and that’s often caused by plugged-in devices trying to draw too much current. Replacing the electrical panel with a new model and new breakers designed for higher amps can fix this problem.