Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Cannelton, IN

There are 0 highly-rated local metal fabricators and restorers.

Need a pro for your metal fabrication and restoration project in Cannelton, IN?

Select your specific project to find the pro for you.

Find Metal fabricators and restorers in Cannelton

Avatar for Dollars for Dimes Mobile Welding, LLC

Dollars for Dimes Mobile Welding, LLC

4351 N 4th St
4.75(
2
)
Approved Pro

Dollars for Dimes Mobile Welding, LLC

4351 N 4th St
4.75(
2
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
4 years of experience

We at Dollars for Dimes Mobile Welding pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

"they have done a wonderful job"

Bradley on January 2022

We at Dollars for Dimes Mobile Welding pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

"they have done a wonderful job"

Bradley on January 2022


Austins Metal Mafia

8175 Boyd Rd
No reviews yet

Austins Metal Mafia

8175 Boyd Rd
No reviews yet
Free onsite estimate

Custom metal fabrication. From restoration to sculptures, gates and handrails. We have proven over the years of you can dream we can build it. From to a twenty three foot tall stainless steel sculpture to beautifully restored cars We have been in business since 2015

Custom metal fabrication. From restoration to sculptures, gates and handrails. We have proven over the years of you can dream we can build it. From to a twenty three foot tall stainless steel sculpture to beautifully restored cars We have been in business since 2015


Cane Run Enterprises

No reviews yet

Cane Run Enterprises

No reviews yet

Custom Welding and Fabrication. Both in-house and mobile capabilities. Certified through AWS and ASME national standards. Capabilities include: Structural Fabrication and Erection Heavy Equipment Repair Stainless/Cast Iron/Specialty Gates/Fences/Metal Artwork

Custom Welding and Fabrication. Both in-house and mobile capabilities. Certified through AWS and ASME national standards. Capabilities include: Structural Fabrication and Erection Heavy Equipment Repair Stainless/Cast Iron/Specialty Gates/Fences/Metal Artwork


Little Sweeney's welding LLC

1262 W Hebron Ln
No reviews yet

Little Sweeney's welding LLC

1262 W Hebron Ln
No reviews yet
Free onsite estimate

I offer portable welding and fabrication shop welding and fabrication mig stick and tig weld I weld on aluminum stainless steel carbon steel and other materials I weld pipe structural steel Heavy equipment farm equipment and anything else that you need do custom fabrication

I offer portable welding and fabrication shop welding and fabrication mig stick and tig weld I weld on aluminum stainless steel carbon steel and other materials I weld pipe structural steel Heavy equipment farm equipment and anything else that you need do custom fabrication


Circle City Coatings

1731 Expo Ln
No reviews yet

Circle City Coatings

1731 Expo Ln
No reviews yet
7 years of experience

Circle City Coatings offers custom Powder Coating, Cerakoting, Sandblasting, chemical stripping media blasting We also offer Automotive Window Tinting in all shades. Here at Circle City Coatings We have set the Bar high. We are firm believers in Quality, Quick turn around so your not waiting forever, Customer Care and satisfaction. We are a Small Locally Owned and Operated Business that has been in operation for close to a 1yr. now. The BEST part of it all is our focus to the very thing that drives us and thats YOU! Our Community and other Small Businesses just like us. Circle City Coatings Guarantees to deliver Quality and Care everytime. So what is Powder Coating you ask. Powder coating is used for both protective and decorative finishes on just about any Metal object but not limited to it beingst common but NOT limited to. The process uses a powder resin with fine pigments combinded and then electrostaticallyed particle become charged and adhere to the surface. Then heated up in a curing oven. Powder Coating: We have the capability to handle a wide variety of jobs. For example: We can handle Rotor's, Motorcycles, ATV's, Farming Equipment, Chassis Frames on or off road, car parts, marine parts, Beds. Ceramic Coating or Cerakote: is more For exhaust systems, motors,heads thermal barrier coatings that can stand temperatures reaching close to 2,000'degrees. Firearms: we use Cerakoting its a way to protect and make more durable againts the elements. We can fine tune any product the way you want we pay attention to the details if there's any masking of critical surfaces that do not get coated We got you covered and if you special request it as well. Light Assembly: After the coating and baking process we are still going strong for you, light assembly is available. Plus If you don't want to or don't have the proper equipment ,we also offer Coating Removal: Sandblasting, media blasting, Burn Off and Chemical Stripping. Let us do the hard work for you.

Circle City Coatings offers custom Powder Coating, Cerakoting, Sandblasting, chemical stripping media blasting We also offer Automotive Window Tinting in all shades. Here at Circle City Coatings We have set the Bar high. We are firm believers in Quality, Quick turn around so your not waiting forever, Customer Care and satisfaction. We are a Small Locally Owned and Operated Business that has been in operation for close to a 1yr. now. The BEST part of it all is our focus to the very thing that drives us and thats YOU! Our Community and other Small Businesses just like us. Circle City Coatings Guarantees to deliver Quality and Care everytime. So what is Powder Coating you ask. Powder coating is used for both protective and decorative finishes on just about any Metal object but not limited to it beingst common but NOT limited to. The process uses a powder resin with fine pigments combinded and then electrostaticallyed particle become charged and adhere to the surface. Then heated up in a curing oven. Powder Coating: We have the capability to handle a wide variety of jobs. For example: We can handle Rotor's, Motorcycles, ATV's, Farming Equipment, Chassis Frames on or off road, car parts, marine parts, Beds. Ceramic Coating or Cerakote: is more For exhaust systems, motors,heads thermal barrier coatings that can stand temperatures reaching close to 2,000'degrees. Firearms: we use Cerakoting its a way to protect and make more durable againts the elements. We can fine tune any product the way you want we pay attention to the details if there's any masking of critical surfaces that do not get coated We got you covered and if you special request it as well. Light Assembly: After the coating and baking process we are still going strong for you, light assembly is available. Plus If you don't want to or don't have the proper equipment ,we also offer Coating Removal: Sandblasting, media blasting, Burn Off and Chemical Stripping. Let us do the hard work for you.


"**SCAM ALERT** You, Travis Reed, are the owner of a company that specializes in the drainage of water from homes. You are either too lazy to complete your task, undereducated in your chosen field of work, or outright deceitful. You were hoping that my wife wouldn't notice that instead of tying into the already present drainage system, you just filled them with dirt and then proceeded to plunge my new fully paid for gutter systems straight into the dirt against my Foundation. Okay, what happens in 5 years? Cracks and flooding in my basement, and clogged gutters. Thank you for doing something you are incapable of doing and don't worry about completing the work that you were paid to do in the first place. After missing five scheduled appointments that you set with me to fix this problem, I who have no background in this work completed the work for you. Anyone considering GoPro Gutters to do work for them would be better off not doing so. Anyone who has had work done already by GoPro Gutters or Travis Reed should go back and carefully inspect the work. P.S. His response to my review on another site is that he doesn't specialize in "drainage systems". That's really funny because in his original quote he verified that they were going to connect into the present drainage system already in place i.e. downspouts that connect to the sewer. The downspouts did not even connect to the drains and then they piled up dirt around them to hide it. He also agreed to come fix the problem which he never did. Why would he agree to come fix it if it's not in his "scope of practice". I'm sorry but all gutter installers connect to established downspout connections. We gave him multiple chances to fix it and he kept saying he was going to but then never showed up. Not a stand up guy, not a good way to run a business."

Victoria P on April 2018

Install seamless gutters and gutter protection.

"**SCAM ALERT** You, Travis Reed, are the owner of a company that specializes in the drainage of water from homes. You are either too lazy to complete your task, undereducated in your chosen field of work, or outright deceitful. You were hoping that my wife wouldn't notice that instead of tying into the already present drainage system, you just filled them with dirt and then proceeded to plunge my new fully paid for gutter systems straight into the dirt against my Foundation. Okay, what happens in 5 years? Cracks and flooding in my basement, and clogged gutters. Thank you for doing something you are incapable of doing and don't worry about completing the work that you were paid to do in the first place. After missing five scheduled appointments that you set with me to fix this problem, I who have no background in this work completed the work for you. Anyone considering GoPro Gutters to do work for them would be better off not doing so. Anyone who has had work done already by GoPro Gutters or Travis Reed should go back and carefully inspect the work. P.S. His response to my review on another site is that he doesn't specialize in "drainage systems". That's really funny because in his original quote he verified that they were going to connect into the present drainage system already in place i.e. downspouts that connect to the sewer. The downspouts did not even connect to the drains and then they piled up dirt around them to hide it. He also agreed to come fix the problem which he never did. Why would he agree to come fix it if it's not in his "scope of practice". I'm sorry but all gutter installers connect to established downspout connections. We gave him multiple chances to fix it and he kept saying he was going to but then never showed up. Not a stand up guy, not a good way to run a business."

Victoria P on April 2018



Porta-Blast of Indiana

7835 N. State Hwy. 3
No reviews yet

Porta-Blast of Indiana

7835 N. State Hwy. 3
No reviews yet
13 years of experience

We are a sandblasting and restoration company that utilizes a crushed glass media in water to restore surfaces. Our process is dustless and so safe it can be used on softer surfaces like brick, limestone and fiberglass. Strong enough to be effective on heavy rust and paint. We accept most major credit cards.

We are a sandblasting and restoration company that utilizes a crushed glass media in water to restore surfaces. Our process is dustless and so safe it can be used on softer surfaces like brick, limestone and fiberglass. Strong enough to be effective on heavy rust and paint. We accept most major credit cards.


Ad-Vance Magnetics

625 Monroe St
No reviews yet

Ad-Vance Magnetics

625 Monroe St
No reviews yet
54 years of experience

ISO 9001:2008 certified company who specializes in precision sheet metal fabrication. We are committed to on time delivery, customer satisfaction, continuous improvement and supplying our customer base with quality product.

ISO 9001:2008 certified company who specializes in precision sheet metal fabrication. We are committed to on time delivery, customer satisfaction, continuous improvement and supplying our customer base with quality product.


The Fireplace Specialist

103 East Iroquois Street
No reviews yet

The Fireplace Specialist

103 East Iroquois Street
No reviews yet
18 years of experience

With over twenty-six years of experience building and remodeling quality homes, we can build or service any residential or commercial structure. Consulting and Sub-contracting fees range based on contract variables.

With over twenty-six years of experience building and remodeling quality homes, we can build or service any residential or commercial structure. Consulting and Sub-contracting fees range based on contract variables.

Showing 1-10 of 26
Metal Fabrication and Restoration questions, answered by experts

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

The best tool for cutting metal ducts depends on the duct's shape and thickness. For round ducts, a duct cutter provides accurate, clean cuts. Reciprocating saws equipped with metal-cutting blades are versatile and suitable for both round and rectangular ducts. They offer speed and precision, especially for thicker metal. 

Tin snips are handy for intricate cuts or smaller ducts. However, an angle grinder with a metal-cutting wheel is powerful and efficient for large or thick metal ducts. 

Yes, many fabricators provide welding, assembly, and on-site installation to ensure structural stability.

Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.

Professional metal fabricators usually charge around $70 per hour. Three of the largest cost factors are the size and complexity of the project and the price of materials. The type of metal can impact the cost as much as the intricacy of the metal fabrication you want done. Another cost factor is your geographic location, as labor and materials can vary widely depending on the cost of living where you live.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Cannelton, IN homeowners’ guide to metal fabrication and restoration services

From average costs to expert advice, get all the answers you need to get your job done.