Best snow removal pros near Third Lake, IL

Heavy amounts of snow could be a problem. In many climates, lots of snow on your rooftop can lead to freeze-thaw cycle that create ice dams, which can damage rooftops. But if you’re using shingle clips, this snow poses an additional problem: As it melts and freezes, it can easily dislodge clips you’ve placed on your roof.

You can clean snow off your roof after a fresh snowfall while it’s still lightweight, but brushing off snow can also dislodge your clips. If you get a lot of snow, then roof clips become less viable.

There is no hard and fast rule about using a snowblower on a specific amount of inches, but most snow removal experts suggest using one on 2 or more inches of snow for best results. This will also depend on what type of surface you’re working on and whether the snow is dry or wet. 

While it is possible to remove snow from your roof without a professional, we don’t recommend it. Accessing your roof can be a dangerous task; pair that with slippery ice and snow that can be heavy to move, and you have a very risky problem on your hands. This dangerous situation becomes more high-risk when there’s a snowstorm or your roof has a steep pitch. To ensure that everyone stays safe, be sure to call a roof snow removal specialist to complete this job with the proper tools and equipment.

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.