Get matched with top fencing pros in Ford Heights, IL

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

There are many types of wood fencing that you can choose from. For split rail fencing, the most common wood types are cedar, pine, black locust, and chestnut. The best wood for you will depend on if you like the way a certain wood looks and the availability of the wood type in your area.

Most of the wood types you can find at your local home improvement store are good choices since they all have rot-resistant properties or are pressure-treated with pesticides. If none of the wood options speak to the look you’re going for, check out vinyl fencing.

The cheapest fence to install is likely to be a wire fence, whether it’s hog wire or chicken wire. Closely following that is something repurposed that would be free to collect, like a DIY pallet fence. Most wire fences are available in large quantities at a low cost, so they’re great for homes with a tight budget.