Get matched with top roofers in Earlville, IL

Generally, roof flashing is installed under the shingles to create a watertight seal and prevent moisture from seeping in and causing damage. However, the exact placement can depend on the type of flashing. For instance, with step flashing, the shingles and flashing overlap each other, meaning the flashing is technically both over and under the shingles. Flashing also typically goes beneath the house siding and is often not visible from the ground.

A gable roof with steep pitches covered in asphalt shingles or wood shakes is the most popular roof for Cape Cod homes. Asphalt shingles started gaining popularity in the early 1900s, so wood shake roofs, which were popular in the 1700s when Cape Cod homes were first built, are the traditional option. You can further modernize your Cape Cod home by raising the roof in the front, back, or both to add living space and change up the traditional single-gable roof with doghouse dormers.

Metal roofs do not inherently leak more than shingle roofs; when properly installed, they are generally less likely to leak. Asphalt shingle roofs are more susceptible to leaks due to factors like wind uplift, damage from extreme weather, moss growth, and ice dams. Over time, asphalt shingles also lose their protective grit, which reduces their waterproofing capabilities. In contrast, metal is a more resilient material that stands up better to heavy precipitation and high winds. However, metal roofs can develop leaks if they are poorly installed, have improperly sealed fasteners, or experience issues from thermal expansion. For this reason, professional installation and regular maintenance are crucial to ensure a metal roof's longevity and superior protection against leaks.

It’s possible to install your chimney cap in some areas, but it’s usually better to hire a professional. Before you attempt a DIY chimney cap installation, check to see if your local building department requires a permit. If it does, you should hire a professional to pull the permit and complete the work for you. Even if you don’t need a permit, getting up on your roof is dangerous, especially if you have an aggressive pitch or slippery roof material, like metal. Hiring a chimney professional guarantees the job is done correctly and keeps you safe from injury.