Get matched with top welders in Crete, IL

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How long does it take to ground a rod?

• <div><p>It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job. </p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Crete, IL?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Crete, IL

*The Angi rating for Welding companies in Crete, IL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Crete, IL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on September 24, 2025

Find Welders in Crete

AF Welding, LLC

4.8(

)

Serving Crete, IL and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

"The owner, Alex, is personable, and professional. He and his assistant came at the appointed time and day, and made the repairs needed. The cost was reasonable, and I'm very happy with my good as new, handsome railing, and the safety it affords us. Thank you Alex."

+198

Response time2 days

Recommended by62%of homeowners

Serving Crete, IL and surrounding areas

Approved

Super Service Award Winner

In business since 2022

Free estimates

Emergency services offered

"Willie is great, went outside of the original scope of the project to solve a few problems. Sources parts and even fabricated a new post in his shop and returned to install. A railing and fence repair pro. Five Star Steel earned 5 Stars⭐️⭐️⭐️⭐️⭐️"

+43

Response time3 days

Recommended by77%of homeowners

Serving Crete, IL and surrounding areas

Approved

Free estimates

Small jobs welcome

Offers commercial services

Hello Im Thomas with TP Fabrication. We specialize in high-quality welding, fabrication, and maintenance services for industrial, construction, and farm clients.\nWhether you need custom fabrication, structural welding, or equipment repairs, we deliver durable, precise solutions tailored to your needs.Our services include:\nPrecision welding (MIG, TIG, Stick) Mobile and on-site repair. Custom metal fabrication availability with competitive pricing. With years of experience, we ensure top-notch craftsmanship to keep your operations running smoothly. Let us help with your next project!\nCould we schedule a quick call to discuss your needs?

7 neighbors recently requested a quote

Request Quote

Daymaker Welding, LLC

5.0(

)

Serving Crete, IL and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"This gentleman does quality welding work. Would not hesitate to hire him again. Thanks!"

Response time1 day

Recommended by100%of homeowners

Serving Crete, IL and surrounding areas

In business since 2010

Free estimates

"Pretty good. Professional and on time. Clean up after"

+41

Recommended by100%of homeowners

Serving Crete, IL and surrounding areas

In business since 2020

Free estimates

Warranties offered

"Pablo and Jersey from Jusherma welding corp.did a amazing job fabricating and installing my new porch railing. Five star work and showmanship, Pablo is a talented and professional welder I highly recommend h"

Response time11 hrs

Response rate94%

Recommended by18%of homeowners

Request Quote

Agustin Welding Works

4.4(

)

Serving Crete, IL and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"As soon as I called the technician he showed up to give an estimate.he showed up the next day b4 the appointment time to get the job done.after performing the work he left the place spotless"

+35

Response time1 day

Recommended by100%of homeowners

Request Quote

Awesome Design Contracting

4.9(

)

Serving Crete, IL and surrounding areas

In business since 2004

Emergency services offered

Credit card accepted

"They came before the cabinet was scheduled to come in and perform all the repairs and replace all the wood and drywall on the wall and then they painted the cabinet came in Thursday and was installed."

+47

Recommended by100%of homeowners

Request Quote

Anytime, Anyweld, Anywhere Fabrication Shop, Inc.

5.0(

)

Serving Crete, IL and surrounding areas

In business since 1988

Free estimates

Emergency services offered

Anytime specializes in aluminum, cast aluminum, stainless steel, mild steel, cast steel, pontoon boats, out drives, aluminum wheels, aluminum dump bodies, restaurant equipment, hoods, grills, back splashes, (316L stainless steel), nozzles, power piping, flanges, heavy equipment, bucket repair, any hydraulic cylinders, steel tracks, duct work, hoppers, tanks, steel stairs and handrails, expansion joints, water towers, Stick, MIG, and TIG welding. Industrial, commercial, or home, there is no repair too large or small.

Recommended by100%of homeowners

Request Quote

AMERICANA IRON WORKS & FENCE

5.0(

)

Serving Crete, IL and surrounding areas

In business since 1985

Free estimates

Credit card accepted

"Good. Came back to service was appreciated."

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 38

Welding questions, answered by experts

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

It will likely take an experienced pro less than an hour to install a ground rod, which is another reason why letting them handle the job is such a good idea. Safety concerns aside, it would likely take you much longer to install a ground rod if you decided to take this one as a DIY job.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

The Crete, IL homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Jacqueline DeMarco
•
May 2, 2026May 2, 2026
10 Types of Wire Fences for Yards and Farms
If you’re considering adding a wire fence to your property, you have choices. Keep reading for a breakdown of 10 types of wire fences.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.