Get matched with top countertop repair pros in Algonquin, IL

The easiest way to calculate a countertop's square footage is to divide your countertop into squares and rectangles, then multiply the length and the width of each piece in inches before adding them together and dividing by 144.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

You most likely purchased a quartz countertop because it won't stain or etch like marble. However, etching can still happen depending on the quality of the quartz and whether it is repeatedly cleaned with harsh chemicals or exposed to acidic spills. Remember, while quartz is more resistant than natural stone, just like Superman when faced with Kryptonite, it is not indestructible.

Marble countertops don’t necessarily crack easily. However, they are more susceptible to damage than some other types of countertops. For example, they can develop etching from acidic liquids, such as lemon or tomato juice. Marble can also chip at the edges if you drop a heavy pan. A faux marble countertop isn’t as delicate as the real deal (depending on the material you’re painting over), but it can still get scratched if you’re not careful. Use hot pads and cutting boards to protect the countertop.