"We wanted to extend our laminate flooring throughout our first floor. JRH worked quickly, got our old carpet removed, and installed the laminate, meshing into the existing laminate perfectly."
"I have hired Steve Ellis twice. Once was two years ago and the other was just this week. Both times he tore out floor tile that was installed incorrectly and then installed new floor tile. The first time was in the laundry room. Ditra mat was originally under the tile and was not thinset to the floor. So the tile was moving and grout was coming out where the traffic areas were. Tile came up in whole pieces. The second time Steve came he tore up the existing tile in the pantry, spare bath and master bath. All of which was incorrectly installed by someone else. Steve and Jeff installed new tile with backer board underneath. They did an excellent job! It looks beautiful! Very professionally done. I know, now, that my tile will NOT move because it is installed correctly. I would not use anyone else to do any work that I need done. The pricing is fair, the resulting work is excellent and they were on time each day and completed the job when they said they would. I couldn't have asked for a better job from Steve and Jeff. I have had very bad experiences with OTHER contractors in the past 40+ years. So I know a good/excellent job when I experience it."
Been doing remodels and home repairs for 10 years can pretty much do what needs done inside of a home if it is something I’m not comfortable with I will let you know
BullDogz is committed to reliable workmanship, efficient installation, and professional results on every project.\nCore Services\nVinyl plank flooring installation\nGlue-down flooring installation\nNail-down hardwood installation\nUnderlayment installation\nFlooring removal (carpet, vinyl, etc.)\nBaseboard removal and installation\nTrim carpentry\nDoor and window installation\nConcrete grinding and floor prep\nFloor leveling and patching\nGeneral handyman repairs\nFurniture moving for flooring installs
"Well. 1st plumber who looked at the system said shower valves needed to be replaced but that was a problem because there are no access panels. Chaub plummer advised valves were good quality and there was no need to replace. He replaced/installed new hardware and did a great job in a timely manner."
"Very good experience! Everyone is very nice and punctual. I was given a bid a year ago and was finally able to have the work done. Then kitchen tune up came in this year they were able to match last years estimate. Delivery time frames were very accurate and reasonable. The kitchen was useable everyday during the remodel. I had a cabinet that needed a new bottom, due to having been cut out by a previous owner to accommodate a taller fridge and never had been repaired. The cabinet was rebuilt and works and looks great. I also wanted access to a lazy Susan from the dining side of the kitchen, which was installed beautifully. My back splash isfantastic! I had decided on a tile mosaic, which took some great talent to cut and install. It turned out beautiful."
"Victor did exactly what was agreed upon. We had a problem with the bullnose tile not entirely covering wherte the vinyl coving was. He was knowledgeable how to solve it be cutting tile to cover and installing a metal piece on top. It made his time to get the job completed take quite a bit lpng"
"Once I sent her all the measurements, it took her a little while to get the options back to me. Overall, they're good designs. However, they're very simplistic and give general ideas for space planning. I was hoping to have a better idea for sizes of furniture for the space and some variations on staging. Jill was very responsive when I did have a question. I'm not sure how helpful it is to have a virtual design done. If we lived in similar cities, I'd probably use her again for help with additional designs. "
Backsplash Installation questions, answered by experts
For glass tile, you want to use unsanded grout. Sanded grout is a stronger and grittier cement grout that is great for installing tiles with wider gaps and into joints. However, it is susceptible to scratching glass tile and is more difficult to use in thinner gaps. Unsanded grout, while more expensive, is easier to fit between thin gaps and is less harsh on delicate materials, like glass tile.
It’s important to leave a gap in the corner when tiling to allow room for tile expansion. Leaving between one eighth of an inch to one tenth of an inch is enough space.
Per the International Code Council, walk-in shower floors should have a minimum slope of 1/4-inch per foot (or a 2% slope) towards the drain. The slope should be no steeper than 1/2-inch per foot (or a 4% slope). This helps safely direct water into the drain rather than all over your bathroom.
You cannot tile directly over hot mop waterproofing because tile requires a smooth, solid surface to adhere properly. Additionally, the shower bed pan needs to be raised and sloped toward the drain to prevent water from pooling. However, you can hot mop and apply a sloped mortar bed over the top (to which the tile can then be adhered).
When working on your bathroom floor tiling, you should always tile the floor first and then refit the toilet afterward. This has both practical and visual advantages—the tile will have a better seal, and the installation will look cleaner.
On the other hand, when you try to cut the tiles to fit around the toilet, you’re putting yourself at a disadvantage. It’s a lot more work, it’s hard to be precise, and mistakes or miscalculations can lead to future moisture damage to the tiling, grout, and subfloor.
The Terreton, ID homeowners’ guide to backsplash installation services
From average costs to expert advice, get all the answers you need to get your job done.
When installing a kitchen backsplash, you’ll need the right tools, materials, and knowledge. Our guide will show you how to install a kitchen backsplash.