Are foundation walls load-bearing?

• <div><p>Yes. Foundation walls are always load-bearing.</p></div>

Get matched with top structural engineers in Gooding, ID

Q: What is the hardest stage in building a house?

• <div><p>The early stages of building a house are harder than the later stages; laying the foundation and framing the house are two of the most challenging steps. However, it varies for everyone. Some people have difficulty installing HVAC, plumbing, and electricity, while others find it harder to plan the house and secure the necessary permits. </p></div>

Q: How high can you build a single brick wall?

• <div><p>A freestanding brick wall that's only one brick thick can usually stand six to eight feet high. If you need a higher wall, it should be at least two bricks thick for adequate stability, and it might require a footing to support the added weight. Additionally, some areas have regulations and codes dictating how high a brick wall can be, so check with local code enforcers to ensure your proposed wall complies with any regulations.</p></div>

Q: How does an engineer assess a building’s structural integrity?

• <div><p>Through detailed analysis of load paths, materials, and existing damages.</p></div>

Q: How do various elements influence the cost of assembling a unit?

• <div><p>Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Gooding, ID?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Gooding, ID

*The Angi rating for Structural Engineering companies in Gooding, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Gooding, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on December 24, 2025

Reviewed in August 2025
We purchased two new sliding glass doors at a home show. We wanted to replace ours because they were hard to slide open and closed. We have been VERY UNSATISFIED with Amazing Exteriors and REGRET ever buying them! They were a month late with the installation and never updated us to tell us when...
Amazing Exterior's of Idaho
Request a quote
Reviewed in December 2024
My contractor was amazing getting the work done just like we asked and in a timely manner even with all the other jobs they had going at the time
Revamp Rebuild & Drywall LLC
Request a quote
Reviewed in May 2024
Capstone inspection is the way to go I would recommend it to anyone
Capstone Inspections, LLC
Request a quote
Reviewed in June 2023
Awesome work and communication throughout the project. Could not meet a more friendly and awesome couple. There were removed several large trees overhanging fence lines, power lines, property lines, and structures. They did such a good job that I referred them to my fathers home for additional...
5C Tree Cutters, LLC
Request a quote
Reviewed in September 2018
The owner of Red Rock Service and Repair, Ben Durfey, 1458 N 1180 E Shelley, Idaho. Ben checked the fifth wheel and told us what needed to be done. Later that day Ben gave a verbal quote on phone and we asked for a written estimate. We were told we needed to give him two thirds down. We gave him...
Red Rock RV Service and Repair
Request a quote
Reviewed in February 2014
Arrived on monday at 9am as agreed. Keith made quick work of the first side of the wall demolition. The most impressive aspect of his work throughout, and at the end of the first day; was how clean he maintained the work area! So, he worked quickly and cleaned things up as he worked. A very cool...
Hooked On Construction
Request a quote
Reviewed in October 2013
I have been searching for a new housecleaner since my former cleaner retired. Finding someone who does a good job and you feel good about working with is very difficult in this area. Irene and I initially spoke by phone and set up a time for her to come for her first cleaning. She was prompt,...
Irene Linder
Request a quote
Reviewed in September 2013
About a month ago the owner, Bob Potter, came to bid on the project. He offered suggestions and we agreed on what needed to be done. The evening before the work was done he called to say tomorrow is the day. Fortunately it worked out well for me. The short notice was a bit surprising. The crew...
ADVANTAGE TREE CARE
Request a quote
Reviewed in September 2013
Kept the car for 2 days to check the engine. Learned it was the gas tank and not engine. Very thorough
Lithia Chrysler Jeep Dodge Of Pocatello
Request a quote
Reviewed in August 2013
Jeff was very professional and had a good level of communication throughout the process. He is busy, and I had to wait a couple weeks before he could take my truck but it was worth the wait. He had the engine steam cleaned and called me with a preliminary diagnosis within a couple hours of...
Askew Machine and Perfomance-Jeff Askew South Side
Request a quote

Find Structural engineers in Gooding

CHRISTENSEN ENGINEERING

No reviews yet

CHRISTENSEN ENGINEERING

No reviews yet

17 years of experience

Licensed professional engineering firm located in Burley, Idaho. We do home inspections, architectural work, mechanical design and structural design.

Meier Architecture • Engineering

No reviews yet

Meier Architecture • Engineering

No reviews yet

43 years of experience

Meier Architecture & Engineering, an Employee Owned company, is a full-service architectural and engineering consulting firm with Registered Architects and licensed Professional Engineers in Civil, Electrical, Mechanical, and Structural Engineering. Formed in 1982, has successfully completed more than 6,600 projects in the past 29 years. Meier Architecture & Engineering, an award winning company providing services from coast to coast, as well as worldwide, we are licensed in 28 states and serve as members of many professional, discipline-specific associations. Mindful of our future, members of our staff are also accredited in Leadership in Energy and Environmental Design (LEED).

Structural Engineering questions, answered by experts

The early stages of building a house are harder than the later stages; laying the foundation and framing the house are two of the most challenging steps. However, it varies for everyone. Some people have difficulty installing HVAC, plumbing, and electricity, while others find it harder to plan the house and secure the necessary permits.

A freestanding brick wall that's only one brick thick can usually stand six to eight feet high. If you need a higher wall, it should be at least two bricks thick for adequate stability, and it might require a footing to support the added weight. Additionally, some areas have regulations and codes dictating how high a brick wall can be, so check with local code enforcers to ensure your proposed wall complies with any regulations.

Yes. Foundation walls are always load-bearing.

Through detailed analysis of load paths, materials, and existing damages.

Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.

The Gooding, ID homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Jeanine Gordon
•
Nov 24, 2025Nov 24, 2025
How Much Does It Cost to Hire a Structural Engineer in Seattle? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in Seattle, WA.
Mackenzie Sanford
•
Nov 28, 2025Nov 28, 2025
How Much Does It Cost to Hire a Structural Engineer in Indianapolis? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in Indianapolis, IN.
Jeanine Gordon
•
Nov 25, 2025Nov 25, 2025
How Much Does It Cost to Hire a Structural Engineer in Dallas? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in Dallas, TX.
Rachel Hoffman
•
Oct 20, 2025Oct 20, 2025
10 Signs of Structural Damage in Your Home
Keeping your home safe and structurally sound should be a top priority. Learn to recognize the signs of structural damage you should never ignore.
Rachel Hoffman
•
Nov 14, 2024Nov 14, 2024
Structural Engineer vs. Architect: Their Differences and Why You Need Both
Do you have an upcoming construction project and aren’t sure whether hiring a structural engineer vs an architect is better? Find out here.
Em Norton
•
Oct 23, 2025Oct 23, 2025
How to Tell if a Wall Is Load-Bearing Before Remodeling
Before you can start a major remodel, you need to know how to tell if a wall is load-bearing. Learn what a load-bearing wall is and how to identify one.