Get matched with top basement waterproofing pros in Eden, ID

The best basement waterproofing method depends on the specific issue causing the water intrusion. For minor problems, simple solutions like installing a properly functioning gutter system to direct runoff away and grading the soil to slope away from your foundation can be effective.

If you have more significant water problems, the solution will need to be more robust:

• For standing water on the basement floor, a floor drain or a sump pump system may be the best solution.

• For water pooling around the foundation, installing an exterior French drain can intercept water before it reaches the basement walls.

Other effective waterproofing methods, which can be used depending on your home's specific needs, climate, and soil type, include sealing the interior walls, landscape alteration, installing interior drainage systems, and using a dehumidification system to control moisture levels.

Roughing in and connecting utilities are the hardest parts of finishing a basement, and they’re the parts we typically don’t recommend doing as a DIY project. Unfortunately, your finishing timeline can be extended by weeks while you wait for contractors and inspectors to install electrical wiring, plumbing lines, and heating/cooling equipment and carry out inspections.

Yes, it’s worth it to repair a crawl space foundation, even if the issue seems relatively minor. Foundation problems often get worse and more expensive to fix if you leave them untreated. Additionally, your entire home, from the framing and flooring to the roof system, relies on the foundation for even and level support. Issues with your foundation will almost always manifest as problems in and above your living space, so it’s important to find a solution.

Topical sealers adhere to the surface of concrete to create a protective layer. In many cases, this is all you need for concrete that sees light to moderate traffic, such as your basement. Penetrating sealers, on the other hand, bond with the free lime in the top layer of concrete to form calcium silicate, which prevents liquid from passing through. This type of sealer protects the surface from water, oil, and gasoline spills.