Get matched with top basement waterproofing pros in Arco, ID

Crawl spaces are the more desirable option overall because they provide additional space for storage and utilities, but they are more expensive to install and maintain. Slab foundations are considered a better option in warmer climates where the depth of the frost line isn’t an issue because they’re more affordable, but crawl spaces are better in areas where the frost line is deep or where flooding can be an issue.

The best basement waterproofing method depends on the specific issue causing the water intrusion. For minor problems, simple solutions like installing a properly functioning gutter system to direct runoff away and grading the soil to slope away from your foundation can be effective.

If you have more significant water problems, the solution will need to be more robust:

• For standing water on the basement floor, a floor drain or a sump pump system may be the best solution.

• For water pooling around the foundation, installing an exterior French drain can intercept water before it reaches the basement walls.

Other effective waterproofing methods, which can be used depending on your home's specific needs, climate, and soil type, include sealing the interior walls, landscape alteration, installing interior drainage systems, and using a dehumidification system to control moisture levels.

Brick is designed to absorb moisture, but it is also designed to let it evaporate as well. So in general, the goal shouldn’t necessarily be keeping moisture out but making sure it has the room to breathe. If you have excess moisture getting through your brick wall, it’s more likely that you have a crack or other issue at play that a typical sealant won’t fix. So, instead of investing in sealant, try repairing your brick wall instead.

It’s not the number of weep holes that should be of concern to builders but rather their spacing. Weep holes are usually spaced anywhere between 16 inches on center when using round tubes or wicking materials and 24 inches on center when using open-head joints. This is a more conservative spacing than the 33-inch maximum spacing on center that’s mentioned in the International Residential Code. All in all, the total number of weep holes a brick exterior should have will depend on the size of the structure.