Get matched with top masons in Arco, ID

Q: Can you enlarge windows in a brick house?

• <div><p>Yes, you can enlarge windows in a brick house. Your masonry contractor will need to cut away exterior brick to make space for the larger window, and you may also need to consult a structural engineer to make sure the window is properly supported inside the frame of the house.</p></div>

Q: What is the best method for painting brick: spraying, rolling, or brushing?

• <div><p>When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.</p></div>

Q: Can I cut used or reclaimed bricks?

• <div><p>Yes, but used or reclaimed bricks can be more brittle, cracked, or uneven than new bricks, so they&rsquo;re harder to cut cleanly by hand. For that reason, you should take extra care when scoring and striking, and expect a higher chance of breakage. If a brick feels especially fragile, score deeper before attempting to split it.</p></div>

Q: Should I drill into the brick or the mortar joints?

• <div><p>You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick&mdash;something that&rsquo;s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it&rsquo;s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for <a href="https://www.angi.com/articles/best-anchors-for-brick.htm">brick anchoring</a>, you'll need to check the manufacturer&rsquo;s recommendations and adjust accordingly.</p></div>

Q: What kind of stain can you use on brick?

• <div><p>To stain brick, you should use a product specifically formulated for brick, concrete, or other masonry surfaces. These stains are designed to penetrate the porous surface of the brick and bond with it. This is different from paint, which sits on the surface and is prone to peeling, flaking, and trapping moisture that can cause damage. Water-based brick stains are often recommended because they are easy to apply, even for DIYers, and they allow the brick to breathe. Avoid using regular paint on brick, as it will not adhere properly and can lead to future maintenance problems.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Arco, ID?

Select your specific project to find the pro for you.

Verified Reviews for Masonry Work pros in Arco, ID

*The Angi rating for Masonry Work companies in Arco, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Masonry Work needs.

*The HomeAdvisor rating for Masonry Work companies in Arco, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Masonry Work needs.

Last update on April 15, 2024

Reviewed in April 2024
Did all the electrical on a tiny home and shop. Good work and very pleased with the customer service.
Mountainside Electric, LLC
Request a quote
Reviewed in December 2023
I can’t say enough great things about Ryan! He has been so responsive, did an amazing job, and has gone above and beyond to help with my house. Thanks Ryan!!
Black iron construction
Request a quote
Reviewed in March 2022
This is a great company and the service was excellent. Would highly recommend it
Streamline Energy Solutions
Request a quote
Reviewed in June 2020
A Through Z Computing was very helpful in diagnosing my old laptop and getting me started with my new laptop. I would highly recommend his service and plan on going back to him for any future assistance.
A Through Z Computing
Request a quote
Reviewed in April 2017
Mr. Wilson went above and beyond to repair my drywall. I will never hire different company for drywall work.
Wilson Drywall
Request a quote
Reviewed in June 2015
Answered my request for bid promptly by phone, arrived at appointed time, called when few minutes away. Discussed the project, made a couple of preliminary cuts, decided he could accomplish what needed to be done on the spot. Took care of the tree in question efficiently, discussing costs as he...
Arborman Tree Care
Request a quote
Reviewed in August 2014
They actually fixed the wrong hose and when I called them to ask them about it, they were very professional and courteous. They told me to bring it back in as soon as I could and they would fix it for free. I took it in the next day at 7:30am and they were ready and waiting and had it fixed in...
WALLY'S AUTO CARE & TIRE FACTO
Request a quote
Reviewed in January 2014
I have a stock older Toyota 4wd Pick up. It takes a hard to find tire size. Tire dealers generally lie to me and try to sell me a close size, but that negatively affects my truck's performance. NOT THESE GUYS, They listened to me carefully and scoured the earth to find the exact tires I needed....
ABERDEEN TIRE
Request a quote
Reviewed in January 2013
One of the owners came out. He quoted me a good price. Fixed it on the spot. Was better than when It was new.
Ex-Cello Overhead Door Co
Request a quote

Find Masons in Arco

Skinner Customs LLC

4.6(

)

Serving Arco, ID and surrounding areas

Approved

In business since 2015

Credit card accepted

Offers commercial services

"We have used Skinner customs many times. They do excellent work. If you want it done right give them a call."

4 neighbors recently requested a quote

Recommended by12%of homeowners

Request Quote

Foundation and Crawl Space Repair of Idaho

4.1(

)

Serving Arco, ID and surrounding areas

Approved

In business since 1990

Free estimates

Warranties offered

"They were on time and on target and did a little extra that they observed above what the invoice was for. Nice person."

Response time1 day

Response rate99%

15 neighbors recently requested a quote

Request Quote

Shuler Contracting and Excavation LLC

5.0(

)

Serving Arco, ID and surrounding areas

Approved

Free estimates

Credit card accepted

Offers commercial services

"It was easy to work with incredibly knowledgeable and his craft, set up level, had to take out a retaining wall near my structure was really grateful. He knew exactly what he was doing. Was able to trust the entire process with a large piece of equipment up against the house went flawlessly graded it perfectly level"

3 neighbors recently requested a quote

Request Quote

Foundations First Northwest, LLC

5.0(

)

Serving Arco, ID and surrounding areas

In business since 2024

Free estimates

Credit card accepted

"Foundation Northwest was amazing! Helped us with water issues in our crawlspace."

+22

Response time2 days

3 neighbors recently requested a quote

Request Quote

Chaud Company Plumbing Services LLC

4.7(

)

Serving Arco, ID and surrounding areas

In business since 1986

Credit card accepted

"Well. 1st plumber who looked at the system said shower valves needed to be replaced but that was a problem because there are no access panels. Chaub plummer advised valves were good quality and there was no need to replace. He replaced/installed new hardware and did a great job in a timely manner."

Recommended by96%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Arco, ID and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"They were good. They were pretty fast and came on time. My overall experience with them has been good."

Recommended by60%of homeowners

Request Quote

Jack Guerrero Concrete LLC

5.0(

)

Serving Arco, ID and surrounding areas

In business since 2016

Free estimates

Offers commercial services

"jack has many years in the trade. With his specialized knowledge and understanding of blueprints. He always delivers a top quality finish and product. I will be callling Jack for all my foundations!"

+14

Response time2 days

Recommended by100%of homeowners

Request Quote

N&L Construction

New to Angi

Serving Arco, ID and surrounding areas

In business since 2015

Free estimates

We are a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We offer a variety of concrete services that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!

Request Quote

Best Bro Excavation LLC

New to Angi

Serving Arco, ID and surrounding areas

In business since 2018

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call today!

Request Quote

LeMaire's painting co

New to Angi

Serving Arco, ID and surrounding areas

In business since 2011

been in the specialized trade for over 25 years. interior, exterior, wallpaper, stain, woodwork refinishing. textured & faux finishes. pressure washing, and water sealing. repaint old metal roofs. and small repairs.

Request Quote

Showing 1-10 of 12

Masonry questions, answered by experts

Yes, you can enlarge windows in a brick house. Your masonry contractor will need to cut away exterior brick to make space for the larger window, and you may also need to consult a structural engineer to make sure the window is properly supported inside the frame of the house.

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.

Yes, but used or reclaimed bricks can be more brittle, cracked, or uneven than new bricks, so they’re harder to cut cleanly by hand. For that reason, you should take extra care when scoring and striking, and expect a higher chance of breakage. If a brick feels especially fragile, score deeper before attempting to split it.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

To stain brick, you should use a product specifically formulated for brick, concrete, or other masonry surfaces. These stains are designed to penetrate the porous surface of the brick and bond with it. This is different from paint, which sits on the surface and is prone to peeling, flaking, and trapping moisture that can cause damage. Water-based brick stains are often recommended because they are easy to apply, even for DIYers, and they allow the brick to breathe. Avoid using regular paint on brick, as it will not adhere properly and can lead to future maintenance problems.

The Arco, ID homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does a Stone Patio Cost? [2026 Data]
Discover the true stone patio cost to plan your budget. Learn about material, labor, and cost factors to estimate your project and make informed decisions.
Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does Brick Wall Repair Cost? [2026 Data]
This guide features information on the costs to repair a brick wall, whether or not you need a brick mason to complete spalling, tuckpointing, or a full restoration.
Timothy Moore
•
Apr 4, 2026Apr 4, 2026
How Much Does Door or Window Lintel Replacement Cost? [2026 Data]
Door or window lintel replacement costs $400 on average, but there are ways you can save. On the other hand, complicated work will increase costs considerably.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Tuckpointing Brick
Wondering who to hire to tuckpoint brick? Learn which brick tuckpointing pros to call and how to choose the right fit for your project.
Jouviane Alexandre
•
Apr 5, 2026Apr 5, 2026
14 Questions to Ask Before Hiring a Masonry Contractor
Review this list of questions to ask when hiring a masonry contractor for home projects.
Taylor Sansano
•
Mar 19, 2026Mar 19, 2026
Who to Call for Stone Wall Repair
If you need masonry work done at your home, this article will help you learn about who to call for stone wall repair to restore safety and aesthetics.