Best siding pros near Sheldon, IA

To clean painted aluminum siding, use a mixture of mild detergent and water applied with a soft brush or sponge. Rinse thoroughly with a garden hose to remove soap residue. For stubborn stains, cleaning aluminum siding with a power washer on a low-pressure setting can be effective. But avoid using high pressure, which could damage the paint.

To calculate how much siding you need for exterior walls, first measure the height and width of the rectangular walls. For the triangular gable walls, measure the width and then the height from the ground to the tallest gable point.

• For the rectangular walls, the calculation is: length x height

• For the triangular gable walls, the calculation is: (length x height) / 2

Once you add these up, include an additional 10% to account for any wastage.

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.

Hail as small as 3/4 inch (about the size of a penny) can cause damage to your siding. When hail reaches 1 inch in size, you can expect to see more cracks, chips, and holes, and hail that’s 1 and 1/4 to 1 and 1/2 inches around will cause significant damage. If you see hail that’s 1 and 1/2 inches to 2 inches or more in size, the damage is likely to be extensive and possibly even dangerous.