Top-rated excavation pros.

Best excavation pros near Newton, IA

Enter your zip and get matched with up to 5 pros

Need a pro for your excavation project in Newton, IA?

Select your specific project to find the pro for you.

Top-Rated Excavation pros in Newton - Updated Nov 2026

Downs Excavating LLC
5.0(
4
)
Building Site - Preparation and ClearingBuilding Site - Preparation and Clearing - For BusinessExcavation - Major Grading or Resloping+2 more

Serving Newton, IA and surrounding areas

In business since 2024

Free estimates

Offers commercial services

"Contacted Downs Excavating to assist with hauling away junk and debris from flood damage and he was quick to show up and get the job done! Fast and friendly service and have recommended Travis to everyone I know."
Response time5 hrs
Recommended by100%of homeowners
Avatar for Prime Surface Solutions
Prime Surface Solutions
5.0(
9
)
Landscape - Minor Grading or Resloping

Serving Newton, IA and surrounding areas

In business since 2024

Free estimates

Credit card accepted

"Prime Solutions did a great job resurfacing our fiberglass shower. It had a few cracks that needed repaired and we went with a new color. They were on time to the job, fairly priced and worked hard until the job was done. Will definitely hire them again should we need any further work done!!"
Zach’s kitchen countertop
Zach’s kitchen countertop
Nicks resurfaced vanities
Nicks resurfaced vanities
Bathtub/ Shower Projects

+45

Response time1 day
VH Excavating LLC
3.3(
15
)
Building Site - Preparation and ClearingExcavation - Major Grading or Resloping

Serving Newton, IA and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"Amazing service, professional work. The concrete supplier sent bad concrete and the final result had issues because of it. Steve and Austin stood behind their work and made it right. Good friendly people who are experts at their work. Couldn’t be happier and recommend that anyone who needs work call these guys."
Recommended by100%of homeowners
Goering Plumbing, Heating, Cooling & Remodeling
3.9(
25
)
Building Site - Preparation and ClearingBuilding Site - Preparation and Clearing - For BusinessExcavation - Major Grading or Resloping+2 more

Serving Newton, IA and surrounding areas

In business since 1932

Emergency services offered

Credit card accepted

"

I purchased 3 solar panels to heat my swimming pool, mounted them to the roof, and then found that the difficulties of working with all the different roof pitch angles was tough to get right, so I contacted professional plumbers to do it, figuring they would get it done properly and much quicker than I could do. 2 guys showed up at the house, verified that I had most of the materials needed (pipes, fittings, etc) and went to work. About 5 hours later they had completed cutting the pipes to fit, cut a hole in the deck, secured all the pipes to the roof and house wall, and run the pipes underneath the deck to the pool area. I had them terminate the pipes into an automatic bypass valve, where my swimming pool guy took it from there. Been a couple months and everything working like a charm, no leaks in the roof or any of the fittings, they have everything fit tight to the roof/walls so no concerns about wind trying to blow it around, etc. The solar panels actually are working better than expected and has had to turn off frequently due to the pool achieving the target temperature of 85 degrees.


"
Recommended by80%of homeowners
Showing 1-10 of 29
Excavating FAQs, answered by experts

Skunk digging looks like a series of small, cone-shaped holes on a lawn or around the perimeter of a home, porch, deck, or shed. The holes that skunks dig when searching for grubs tend to be no more than four inches in diameter and may be up to four inches deep.

Trenching and boring are two distinct methods for installing underground utilities. Trenching involves digging a channel using equipment like an excavator, trencher, backhoe, or shovel. While it is a simpler process, it causes significant disruption to the surface, landscaping, and surrounding ecosystems.

Boring, also known as directional boring, is a less invasive alternative that uses a drill to create a tunnel for utility lines without disturbing the surface. This method is more precise and is ideal for installations that need to go underneath buildings, roads, or bodies of water. Although boring is less disruptive, it is generally more expensive than trenching.

Most residential basements are 8 to 10 feet deep. You can dig deeper depending on building codes, but it does become more difficult. You’ll likely need to install stronger foundation walls and additional supports to handle the increased load. Depending on the water table, you may also need a water management system. Clay soil can support a deeper foundation than sandy soil. A structural engineer will be able to tell you the maximum, feasible depth.

The best method for digging a trench depends on the scope of the project. For a short, shallow trench (less than 2 feet deep) in light, soft soil, digging by hand may be sufficient. However, digging by hand is labor-intensive, so consider the effort required. A machine trencher is the better option for longer trenches (over 100 feet), deeper ones, or when dealing with difficult soil conditions, such as rocky or hard ground, or obstructions like tree roots. A machine can save significant time and energy in these situations.

Yes, chipmunk holes may have two or more entrances. Chipmunks can create an entire network of burrows. Having multiple entrances makes it easier for them when trying to escape from a predator, such as a snake, or if an entrance collapses due to flooding. Each entrance leads to the nesting chamber underground, which is where the chipmunk spends the majority of its time sleeping.

The Newton, IA homeowners’ guide to excavation services

From average costs to expert advice, get all the answers you need to get your job done.