How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.</p><p>Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Earlham, IA

Q: How many metal sheets will I need?

• <div><p>The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.</p></div>

Q: How do you make stainless steel shine?

• <div><p>To restore an appliance&rsquo;s shine, clean the surfaces using a natural cleaning solution, and then use a mineral oil or olive oil and a soft microfiber rag to polish stainless steel surfaces in the direction of the graining. A little goes a long way, so dip the cloth in a small amount of oil. If you have any excess, continue with a dry part of the microfiber cloth to soak up any remnants.</p></div>

Q: How long does metal fabrication take?

• <div><p>Most projects take 1-4 weeks, depending on material sourcing, design intricacy, and required finishing treatments like powder coating or galvanization.</p></div>

Q: What factors affect fabrication costs?

• <div><p>Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Earlham, IA?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Earlham, IA

*The Angi rating for Metal Fabrication And Restoration companies in Earlham, IA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Earlham, IA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on October 28, 2025

Reviewed in May 2023
Zook's Look has done work for us on several occasions and every time the crew did a fantastic job. Chris Zook communicated clearly about the process and provided updates on the progress. The crew completed every job on time and left the place very clean when they were done. Chris is always...
Zooks Look
Request a quote
Reviewed in October 2017
It went pretty well. The 2 employees were friendly, and worked efficiently. The only problem was an old stain surfaced that hadn't been previously visible. (It had something to do with the type of chemical used by the previous owners to clean.) I called and the workers came back and worked on...
Durachem
Request a quote
Reviewed in June 2015
Brian was very professional and knowledgeable. He was prompt with his quote and scheduled the installation within a week of my acceptance. The installation took a day and half, which is typical for both furnace and a/c. Sheets were laid on the floor so they wouldn't soil the carpet. His...
Midwest Comfort Heating & Cooling
Request a quote
Reviewed in May 2014
There were no problems. The owner came twice to discuss the project, then the workmen came when he said they would and finished the job promptly. I did call about a missing threshold and was told it was being fabricated. It was installed a short time later.
AMES TILE INC
Request a quote
Reviewed in April 2014
Mr. Burtt was prompt in coming out to look over the project, and then prompt to do the work - the very next day. I had requested that the access panel be inconspicuous, and had to really look carefully to find it. Mr. Burtt did the work faster than he said he would, and even tidied up another...
William L Burtt
Request a quote
Reviewed in October 2013
Once the negotiations were settled, a date for the installation was made. It was in the following week, servicemen arrived on time, worked quickly, protected the floors, and cleaned-up after themselves. It was a professional job, start to finish. There were two servicemen working as a team in...
Connett Services
Request a quote
Reviewed in September 2013
The project manager made the initial inspection, scheduled the crew and let us know what to expect at every step. The crew was fast clean and very careful to protect all the areas of foot traffic. They were always on time, kept us completely informed, and did no work until they were sure we knew...
Firstcall Construction & Restoration
Request a quote
Reviewed in July 2013
This was the worst experience of picture taking ever. Do NOT go here if you have toddlers. The photographers are not prepared to handle children that don't sit still, which in my experience is just about every toddler! The photographer would attempt to make my 1 year old smile, and she...
PORTRAIT INNOVATIONS
Request a quote
Reviewed in May 2013
Project went very well. New gutters were installed on porch roof after the roof was reconfigured to drain to the side rather than toward front of house. Existing gutters on the rest of the house were inspected and cleaned. Water flow reviewed to assure proper drainage. Down spout rerouted so...
Joe Gutter
Request a quote
Reviewed in July 2011
Set up an appointment for Window World to come out Tues., May 17th, to write up and sign a contract. Half of the payment was needed up front ($402). Window was ordered and installed five weeks later on June 22. After the installers were done installing the front window, they had me look over...
WINDOW WORLD of Des Moines
Request a quote

Get matched with top metal fabricators and restorers in Earlham, IA

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Earlham, IA?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Earlham, IA

Find Metal fabricators and restorers in Earlham

Friend Portable Welding

Friend Portable Welding

SCI Service & Repair

SCI Service & Repair

Lucky 3 LLC

Lucky 3 LLC

Adam Swets Handyman

Adam Swets Handyman

Koenig Engineering & Machine

Koenig Engineering & Machine

Corn States Metal Fabricators

Corn States Metal Fabricators

Air Support Heating & Air Conditioning

Air Support Heating & Air Conditioning

One Off Restoration

One Off Restoration

Professional Maintenance and Management Group

Professional Maintenance and Management Group

Eldridge Welding And Machine

Eldridge Welding And Machine

The Earlham, IA homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Earlham? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Earlham Metal fabrication and restoration services on Angi who specialize in any of these tasks