Get matched with top masons in Waikoloa, HI

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Stone houses used to be much more practical, but with the advent of stronger and cheaper materials like concrete, they aren’t seen as much anymore. There are some parts of the world where it makes sense to build with stone, and they are usually next to a stone quarry. Stone is, however, very weather-resistant, which is why many homes near the sea and on mountains are still built with local stone.

Yes, you can cut patio stones with a circular saw. Similar to using an electric grinder, you will need to use a diamond blade as this is the most effective blade for cutting a material like stone. The stone must be wet when using a circular saw to ensure the cut is smooth.

Yes, you can paint stone on the exterior of a house. It’s important to properly prep the stone by cleaning off dirt and debris. You’ll want to apply at least two coats of paint to get the most even and complete coverage. Any pinholes or missed spots, however small, can allow moisture to get into the masonry and potentially cause the paint to blister and peel from the stone.