Get matched with top drain pipe installers in Naalehu, HI

Another common question is, what pressure should your well tank be set at? The standard rule of thumb is to set your well tank’s pressure at 2 psi below the cut-on point of your pressure switch. So if your well is set up for a high cycle of 40/60 psi, your pressure should be set to 38 psi. If you use a low setting of 30/50 psi, you would set the pressure to 28 psi.

It’s possible to snake minor drain clogs yourself, provided they sit within a foot or two of the drain itself, but it’s usually best to hire a professional plumber regardless. Even experienced DIYers have a high chance of accidentally pushing the clog further into the drain using a drain snake or another tool, so hiring a plumber is the ideal course of action. A professional plumber can use camera equipment to locate and identify the clog, and remove the entire blockage to fix your issue permanently.

A hose bib is typically located on an exterior wall of the home, about 6 to 18 inches from the ground or on a deck floor. It will have a top handle that you use to turn the water supply on and off. It will also have a male hose thread, or MHT, on the outlet side, where you would connect a hose.

If you know the job is going to be extensive (and you don’t like surprises), hiring a Roto-Rooter specialist may make sense for you. You’ll know how much you’re going to pay right away.

That said, hiring the best plumber isn’t solely about price. If you've worked with a plumber you trust before or have a list of plumbing services you need tackled at your home, working with a plumber might be a better choice for you.