Get matched with top sewer cleaners in Willacoochee, GA

The cost to repair a main sewer line clog is about $3,110 on average. The average cost range is  $1,310 to $4,950, but it can go as low as $215 and as high as $9,300 or more. The cost factors for this repair include the severity of the clog, pipe accessibility, video inspection, removal method, permits, pipe material, labor rates in your area, and time of year. Repairs made from outside during the winter can be more difficult due to the frozen ground or during the spring if the ground is saturated from a lot of rain and snow melt.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If you’ll be digging up your floor to get access to your pipes when putting in a sewer backflow preventer, this would also be a good time to take care of any other plumbing issues or renovations. For example, you could install additional pipes for a basement bathroom. Since the floor will be sealed over with concrete when you’re done, now’s a good time to take care of those bigger tasks.

Regardless of the drain cleaner type you choose to use, they all work through chemical reactions that create heat. Thanks to the heat, the clogged hair begins to dissolve until it is able to be flushed away. To avoid clogs in your drain due to hair, use hair catchers and empty them out after every shower.