Get matched with top fencing pros in Hoboken, GA

Fabricating an aluminum fence costs about $4,350 on average, ranging from about $2,450 to $6,500. Your fencing costs can run as low as $750 or as high as $11,000 or more, depending on the fence's size, complexity, and geographic location. You should consider additional cost factors including the thickness of the aluminum, height of the fence, necessary permits, and custom colors.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.

The depth of the fence posts depends on the height of your fence. If you’re installing a 6-foot fence, then digging 2-foot-deep holes for the fence posts will help ensure a secure installation. However, if you’re installing an 8-foot fence, the posts will need to be deeper than 2 feet to support the structure properly. Also, consider how far apart the fence posts should be to provide adequate support.