Get matched with top stone countertop pros in Mayo, FL

A minimum overhang of 10 to 12 inches is generally recommended for countertop or island seating to provide enough legroom. For increased comfort, an overhang of 15 to 18 inches is ideal, allowing for more space and a relaxed experience. However, a 10-inch overhang can be sufficient in certain situations, such as for bar-height countertops, when using small stools, or in smaller kitchens where space is limited. Taller countertops may also require less overhang than shorter ones. Ultimately, you should consider your specific needs for legroom and measure to ensure the overhang fits comfortably within your kitchen's layout.

There are many differences between solid surface and quartz countertops. Whether one is as good as the other will depend on what you value most in a counter. These two materials are nonporous, although quartz is more durable. Some people may prefer the look of quartz, although they’re both available in many different colors and designs.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Using water when cutting stone drastically reduces the amount of dust that comes off the stone. It’s beneficial to cut down on the amount of dust for respiratory and other safety reasons, such as keeping your vision clear while using an electric tool. Even with protective eyewear, the dust can still cloud your safety glasses. You should always wear protective gear when cutting stone.