Get matched with top sewer cleaners in Captiva, FL

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Depending on the home, wastewater either goes into a septic tank and seeps back into the backyard or is sent via sewer system to a local sewage-treatment plant. Septic systems naturally separate different components of the waste so that it can naturally and safely disperse it. They are usually reserved for homes not served by a municipal sewage department (like rural homes). A treatment plant, on the other hand, speeds up that process through screening and purification.

Sometimes, the drain is just too clogged—thanks, stubborn hair and soap scum. In this case, you’ll need a more powerful drain cleaner than you can DIY safely at home. But this doesn’t mean you have to choose a traditional drain cleaner. 

You can find biodegradable drain cleaners at your local home improvement store or online for those drains that need a little more oomph. 

While on the hunt for a formidable drain cleaner, the best options are non-chemical clog solutions that combine enzymes and bacteria.

Bleach isn’t likely to help unclog a sewer line. Bleach isn’t useful in this situation because it won’t dissolve the grime and debris in the clog. Instead, you want to use ingredients that will have a chemical reaction to clear out the buildup, like vinegar or salt and baking soda.