Get matched with top dishwasher installation pros in Clayton, DE

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.

The frequency for cleaning your dishwasher filter depends on your usage habits. If you run the dishwasher daily and don't scrape or rinse dishes before loading, you should clean the filter about once a month. For those who use it only once or twice a week and rinse items beforehand, cleaning it every three to six months may be sufficient. A clear sign that your filter needs cleaning is a musty smell, even after a wash cycle. Regularly cleaning the filter is important to prevent food buildup and clogging over time. It can be helpful to add this maintenance task to your calendar to stay on schedule.

A clogged air gap can cause a dishwasher not to drain. There are, however, other potential issues that can lead to improper drainage. For example, if you have attached the air gap to a garbage disposal and forgotten to remove the knockout plug, wastewater may backflow into the dishwasher. Check that the air gap is installed properly, and then look for clogs in the air gap and dishwasher filters. 

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.