Get matched with top epoxy flooring pros in Placerville, CO

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.

If your garage floor is heavily soiled or stained, then it’s a good idea to powerwash it with a concrete cleaner before sealing. This process will remove dirt and debris to help the new sealer bond to the concrete properly, and it will also improve the look of your sealed garage floor. After power washing your floor, make sure you let the concrete dry completely before applying sealant, usually for 24 to 48 hours.

Polished concrete floors also have downsides. Some homeowners, for example, might dislike the coldness of the material (though area rugs can help warm up the space). Concrete floors are also hard, which isn’t always ideal for children and pets. What’s more, these floors are susceptible to cracking, and repairs can be costly. Some homeowners might not like that installation isn’t DIY-friendly. 

Concrete can take years to fully settle, but interior concrete floors are mostly settled after a year. Shifting and settling can occur throughout your home’s life, but most major settling happens the first few years after the concrete is poured. It’s not uncommon for minor cracks to appear in concrete floors over time—check with a concrete pro to ensure new cracks don’t indicate a structural issue in your home.