Get matched with top garage pros in Montclair, CO

If you open your garage manually, you don’t need sensors. If you have an automatic garage door opener, sensors are required by law. The federal law UL 325 mandates that all residential garage door openers in the U.S. must include sensors. Designed to prevent accidents and reduce the risk of entrapment, the sensors should be able to reverse the motion of the garage door within two seconds of detecting an obstruction. The sensors are there to keep you, your family, and your belongings safe from a door that might otherwise come down too hard or too fast.

If your cement garage floor is sinking and cracking, your first step should be to call a local structural engineer to assess the problem. They can determine if it’s a minor amount of sinking related to normal settlement or if the issue is structural in nature. If you do have structural damage, the engineer or a foundation repair company that you hire will come up with a plan to fix the issue, which often consists of mudjacking for less severe issues or underpinning for more extensive problems.

Single and double garage doors have pros and cons, but it's all based on personal preference regarding which one is better for you. Two single garage doors give you more control over airflow entering your garage but double the system, which means double the upkeep cost. 

On the other hand, two-car double garage doors are more convenient but can stop you from leaving if a piece of hardware malfunctions.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.