Get matched with top driveway gate pros in Ukiah, CA

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Other mechanisms can help you keep your gate securely shut. Secure gate latch types will do the job, such as magnetic or spring-loading, self-closing lever varieties, or automatic gate openers. However, they won’t control the speed at which the gate closes. You can purchase slam plates that use rubber buffers to reduce noise and the potential damage-inducing impact of a fast-closing, heavy gate.

Whether you can attach a wood extension to a vinyl gate depends on the gate's construction. Some vinyl gates are sturdy enough to allow wood or vinyl boards to be attached. Many, however, have hollow frames that may not hold screws or heavy extensions securely. For these, consider alternative extension options such as a rubber flap or chicken wire.

Your gate should be 3/4 to an inch smaller than the opening. The opening size that you need for your gate can vary depending on your hinge type. You may also need to add reinforcing braces if the gap between your gate and the fence is not uniform from top to bottom.