Get matched with top door pros in Studio City, CA

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project. 

A door sill is the bottom portion of your door frame, while a threshold is the transition piece that separates the two types of flooring between rooms, or serves as the transition between the interior and exterior on an exterior door. The threshold sits on top of the door sill. A kick plate is a protective plate that sits against the face of a door to prevent damage to the door from feet and shoes. You’ll usually only find kick plates on exterior doors, while every door has a door sill, and most exterior and interior doors have a threshold.

A prehung door is a door that comes ready to install, already mounted in its frame with hinges and stop molding included. Because everything is factory-aligned, installation is quicker, more precise, and convenient, as you don't need to drill or align the hinges yourself. This makes it a smart option if your current frame is damaged, uneven, or if you're working on a new build. Installation involves fitting the entire unit into the rough opening, shimming and leveling it, and then securing it. If you are replacing an existing prehung door, the process is even simpler, often just requiring you to swap the old unit for the new one and secure it with a few screws. Prehung doors typically cost only slightly more (around $20) than a door slab alone, making them an efficient choice.

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.