Get matched with top pool table assembly pros in Santa Ana, CA

A pool builder can advise you on the best design for your property and vision, and can walk you through the process from design to a swim-ready pool. Knowing which questions to ask a pool builder can help ensure you choose the right person for the job.

The best way to kill off an algae bloom in an aboveground pool is to shock it with a large dose of chlorine. Shock typically kills off algae in about one to three days, although it can take longer if the pool water is in poor condition. After the shock treatment, add algaecide to prevent algae from growing back, and test the water every few days with test strips to ensure the pool’s pH doesn’t get out of whack.

Shipping container pools are prone to rust and corrosion over time, especially if you install a saltwater system. Though the interior of your pool should be lined, the outside is at risk. Luckily there are a few things you can do.

Elevate your pool or place it on a foundation to prevent moisture buildup along the bottom of the container. Apply a rust inhibitor or paint to protect the outside of your pool, and maintain the proper chlorine levels to reduce the rate of corrosion. Regularly inspect your pool for signs of corrosion, and take action when necessary. 

Most of the time, though there may be some code variations on the local level, a water source like a pool requires a GFCI breaker. These breakers detect electrical leaks of 5 mA or more and trip the breaker. However, the size of the pool and motor type determine the exact GFCI needs. A GFCI outlet with a reset button may be enough for an aboveground pool with a small motor or pump. Consult a pool electrician to determine the appropriate installation and protection measures needed for your pool.