Get matched with top door pros in Placentia, CA

Before attempting to reinforce an apartment door, speak to the property owner. If the door hasn’t been updated in a while, the landlord may offer to cover the cost of a professional locksmith or your expense of this security update. Rekeying a door can be a costly and lengthy affair, so try low-impact, inexpensive tricks—like installing a deadlock or a door jammer—first.

You can attach the hinges to either the door or the frame first, depending on your preference. The order will not affect how the door hangs or the ease of installation. However, we recommend starting with the top hinge over the bottom one for stability, as it’s much easier to support the door from below while you install the top hinge. It will also be easier to pull the door outward from the hinges as it hangs from the top than it would be to push the door toward the hinges, as there’s less clearance on the lock side.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

You can use a variety of wood to build a barn door, but the most common options include 1-by boards and 2-by boards for the backing and the decorative boards on the front of the door. Softwoods like pine will save you some money and should hold up well, while hardwoods like maple and oak will stand up to more wear and tear. You could also build the backer out of plywood to minimize the cuts you need to make. Whatever you decide on, make sure the width of the wood is compatible with the mounting brackets you buy.