Get matched with top garage door pros in Pacifica, CA

For a garage to be included in a home's official square footage, it must qualify as livable space. This generally means it needs to be attached to the home and have permanent finishings like proper insulation, finished walls and ceilings, and adequate ventilation. To be considered livable year-round, it should also have heating and cooling. The specific legal requirements can vary by location, but if a garage is converted into a finished room meeting these criteria, it may be counted toward the total square footage.

An insulated garage door is a great long-term investment if it’s within your budget. They save energy and give the door year-round usability. In other words, the door pays for itself after a few nasty winters. Most modern garage doors already have a fair amount of insulation, so look into those options if you don’t feel comfortable splurging.

You don’t need a garage door opener unless you need or desire the convenience they offer. While you may be able to open some garage doors manually, having a garage door opener makes life a lot easier. There is an exception, though—a motorized opener is an absolute must if you have a two-car garage (or larger), as the door will be too heavy for the average person to lift on their own.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.