Get matched with top vinyl siding cleaning pros in Oxnard, CA

Matching new vinyl siding to your old siding can be challenging. Vinyl siding fades over time due to sun exposure, so even a new panel of the exact same color may not be a perfect match; this is often more noticeable with darker colors. Additionally, manufacturers frequently update their products, which can lead to older siding styles and colors being discontinued, making an exact match difficult to find.

For the best chance at an accurate match, try to purchase the same model and color of siding that is currently on your home. If a perfect match isn't available or if fading is an issue, you have a few options. Cleaning the original siding can sometimes help, or you can consider painting your existing siding to create a uniform appearance with the new panels.

The most durable solution is to use siding fasteners to fix loose siding. However, an inexpensive and popular method is to use caulk by adding it every 6 or 8 inches along the affected siding. It's best not to use too much caulk, though, so it doesn't ooze out from behind your siding. Another solution to fix loose siding is to insert screws through drain holes. 

Whether vinyl siding needs to be replaced or repaired depends on the severity of its damage or wear and tear. For example, a small hole can be repaired, where large tears may need to be replaced. Cracks, chips, insect damage, loose pieces, and melted side panels are clear signs that the vinyl siding needs to be removed or replaced. It’s relatively easy to learn how to replace vinyl siding, as it’s lightweight and manageable.

If you’re trying to cover up damaged vinyl siding with some other material, properly repairing the damage is likely just as easy. Avoid covering up damaged siding under most circumstances. Water and mold can easily get trapped behind it and cause more harm than the damage already there. 

If you need a fast, temporary repair until you have time to fix the damage properly, use a generous amount of caulk or spray foam insulation to fill the gap, knowing that you’ll need to remove the material later.