Get matched with top barndominium builders in Needles, CA

Environmental Testing & Research Laboratories, Inc

4.85(

347

Customers say: True professional

Recommended by 93% of Angi customers

ETR Laboratories in an analytic laboratory with a broad range of commercial, industrial and individual clients. We provide analytic services using a wide variety of scientific methods including GC/MS, IC/MS, GIR, NMR and SEM equipment. We can do particle analysis, organic and inorganic chemical analysis and micro analysis on biological and other materials. Private water analysis is our specialty. Award winning. Additional DBA - Environmental Testing & Research Laboratories Inc, ETR Labs, ETR Laboratories.

"as advertised"

Nancy C on July 2018

"as advertised"

Nancy C on July 2018

LTD Management & Maintenance

4.66(

102

LTD Management & Maintenance

4.66(

102

Customers say: Super punctual

29 years of experience

30 years of experience, I am a trained structural engineer & crews are hired on an as-needed basis.

"He never returned to finish the job and would not return phone calls I ask for a partial refund"

Nick P on November 2019

30 years of experience, I am a trained structural engineer & crews are hired on an as-needed basis.

"He never returned to finish the job and would not return phone calls I ask for a partial refund"

Nick P on November 2019

CANYON STATE ENTERPRISES LLC

4.50(

CANYON STATE ENTERPRISES LLC

4.50(

Customers say: Quality work

24 years of experience

We are licensed general contractors in both Arizona and California. We also hold roofing licenses for Arizona, California, and Nevada. We specialize in large commercial projects as well as residential construction and remodeling. Our large, trained staff will bring your project in on-budget and on-time.

Lopiccolo Construction Inc

Lopiccolo Construction Inc

DBA - LCX Construction. LCX Construction is reliable and on time. We contract only one job at a time, which makes us quick, clean, and cost effective. Our workers are friendly and courteous. We have a personal relationship with our architect, so we can produce engineered plans for your ideas. We are licensed, bonded and insured.

ACE Design Drafting

4.20(

ACE Design Drafting

4.20(

Customers say: Terrific value

36 years of experience

Costume home design, additions and remodels.

"My husband and I met with ACE Design and Drafting (ACE) in August 2023 to review the drawings we had prepared and conduct an interview regarding skills, experience, and process in preparing the plans. As a result of the interview, in August 2023 we entered into an agreement for ACE to prepare building ready plans for our project. The estimate to complete the plans was 3 months. Although our experience with ACE began as amiable, it slowly deteriorated to less than satisfactory. Our verbal phone communication and interaction with ACE soured, and we were no longer able to communicate/interact with ACE verbally over the phone, only by email. Unfortunately, communication with ACE through email did not improve. Our communication issues or lack of communication with and from ACE caused a considerable delay of the submittal of our plans to the County. They were not able to be submitted to the County for initial review until February 2024, nearly six (6) months after entering into the agreement with ACE. We experienced unfavorable interactions with ACE which are noted below. · ACE misplaced the drawings we provided. As we did not have a second copy of the drawings (our mistake), this delayed ACE in preparing the plans. We were in California, so it was necessary to travel to Lake Havasu City, Arizona and assist ACE in locating the drawings in the office. · The plans were submitted to Mohave County (County) for review and the County noted various corrections/redlines were required. ACE was contacted by letter which detailed the redlines needed for the house and shop. Per the County, ACE did not make all the required corrections/redlines (although our agreement states required corrections will be made when ordered by the County). The County representative was very helpful and was able to make the remaining required corrections/redlines as noted below. o House § Correction requested - Wall bracing for this structure does not meet minimum of code. Please revise. (Ref. IRC 2018 R602.10) · This was as a result of stucco vs metal siding. The correction from wording of stucco to metal siding was noted on the plans, however, the legend which showed wall board was being used was incorrect as was the use of the wall board legend icon (a 3 in a triangle) noted around the exterior of the structure. As our home would have metal siding, wall board is not required. However, sheathing (a 2 in a triangle) is required on the entire exterior of structure. The County made the correction by striking through the “wall board” legend icon and replacing in red ink the “sheathing” legend icon. o Shop § Correction requested -Header over garage door fails loading. Please revise. (Ref. IRC 2018 R301.1) · The plans show a correction of a “4x12 header”; however, in this situation a 6x12 header was required. The County made the correction by striking through “4x12 header” and replacing in red ink “6x12 header”."

Stephanie A on May 2024

Costume home design, additions and remodels.

"My husband and I met with ACE Design and Drafting (ACE) in August 2023 to review the drawings we had prepared and conduct an interview regarding skills, experience, and process in preparing the plans. As a result of the interview, in August 2023 we entered into an agreement for ACE to prepare building ready plans for our project. The estimate to complete the plans was 3 months. Although our experience with ACE began as amiable, it slowly deteriorated to less than satisfactory. Our verbal phone communication and interaction with ACE soured, and we were no longer able to communicate/interact with ACE verbally over the phone, only by email. Unfortunately, communication with ACE through email did not improve. Our communication issues or lack of communication with and from ACE caused a considerable delay of the submittal of our plans to the County. They were not able to be submitted to the County for initial review until February 2024, nearly six (6) months after entering into the agreement with ACE. We experienced unfavorable interactions with ACE which are noted below. · ACE misplaced the drawings we provided. As we did not have a second copy of the drawings (our mistake), this delayed ACE in preparing the plans. We were in California, so it was necessary to travel to Lake Havasu City, Arizona and assist ACE in locating the drawings in the office. · The plans were submitted to Mohave County (County) for review and the County noted various corrections/redlines were required. ACE was contacted by letter which detailed the redlines needed for the house and shop. Per the County, ACE did not make all the required corrections/redlines (although our agreement states required corrections will be made when ordered by the County). The County representative was very helpful and was able to make the remaining required corrections/redlines as noted below. o House § Correction requested - Wall bracing for this structure does not meet minimum of code. Please revise. (Ref. IRC 2018 R602.10) · This was as a result of stucco vs metal siding. The correction from wording of stucco to metal siding was noted on the plans, however, the legend which showed wall board was being used was incorrect as was the use of the wall board legend icon (a 3 in a triangle) noted around the exterior of the structure. As our home would have metal siding, wall board is not required. However, sheathing (a 2 in a triangle) is required on the entire exterior of structure. The County made the correction by striking through the “wall board” legend icon and replacing in red ink the “sheathing” legend icon. o Shop § Correction requested -Header over garage door fails loading. Please revise. (Ref. IRC 2018 R301.1) · The plans show a correction of a “4x12 header”; however, in this situation a 6x12 header was required. The County made the correction by striking through “4x12 header” and replacing in red ink “6x12 header”."

Stephanie A on May 2024

Cullumber Engineering

Cullumber Engineering

Cullumber Engineering is a civil engineering firm specializing in the structural design of transportation, residential and commercial structures. Over the years Cullumber Engineering has built strong relationships with homeowners, contractors, building officials, and state and local governments. We are a structural engineering company founded on ambition and integrity which aims to teach, motivate, and inspire those around us.

The "RIGHT" Way Home Improvements

The "RIGHT" Way Home Improvements

Need a local handyman? Call The "RIGHT" Way Home Improvements team. Providing Residential, Commercial and Senior Handyman Services for Bullhead City, Fort Mohave, Mohave Valley, Needles and Laughlin. Services: Property Maintenance, Carpentry, Plumbing, Electrical, Interior and Exterior Painting, Remodeling, Mobile Home Repair, General Residential, Commercial and Maintenance Services, Drywall Repair, Roof Tiling and Repair, Window Repair and Installation, Deck and Fence Installation and Repair, Crown Molding, Porch and Patio Construction, and any other repair and maintenance projects on your list!

"This is our 4th handyman since buying property out here 2 years ago and he is fabulous. We finally have our o e home finished and now we will be having him do our other house. He just gets in there and gets it done, quick and efficient."

Karen V on July 2020

"This is our 4th handyman since buying property out here 2 years ago and he is fabulous. We finally have our o e home finished and now we will be having him do our other house. He just gets in there and gets it done, quick and efficient."

Karen V on July 2020

Strafford Window Manufacturing, Inc.

Strafford Window Manufacturing, Inc.

We do not manufacture windows or doors for homes nor do we use Insulated glass. Strafford Window Mfg. manufacturers custom wood windows for barns, sheds, stables, pool houses, cabin, porches and interior applications in the home. Our windows are made of all wood and single strength glass. Call for pricing on Tempered glass. Strafford Window MFG. manufactures Sashes, Transoms, Single Hung Window Units, Hopper Window Units, Fixed Window Units and Screens.

"These windows are solid, well built and look great. I will be ordering more for my house."

Don P on September 2020

"These windows are solid, well built and look great. I will be ordering more for my house."

Don P on September 2020

MAAS Construction INC

MAAS Construction INC