Get matched with top door pros in Dinuba, CA

The width of your door jamb should match your wall thickness exactly, so it depends on your wall. For standard door openings, the width is equal to the width of a 2-by-4-inch  stud, plus the width of the drywall on both sides—about 1/2 inch each—which comes out to 4 9/16 inches. Block walls and framed walls that use 2-by-6-inch framing require a door jamb that’s 6 9/16 inches. You should always measure your finished wall thickness to get an accurate width for your door jamb material.

Minor modifications like grab bars and threshold ramps can be DIY, but professional services ensure compliance with ADA standards and structural safety.

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.