Is LVL more affordable than steel I-beams?

• <div><p>Yes, an LVL beam is more affordable than the <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">cost of a steel I-beam</a>, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists. </p></div>

Get matched with top welders in Crockett, CA

Q: What’s the difference between a lintel and a beam?

• <div><p>The difference between a lintel and a beam is what loads each is responsible for supporting. A lintel is a type of beam that is responsible only for supporting the load above an opening, such as a window or door, and transfers the weight to the side walls around an opening. A beam supports the slab and transfers the load to nearby columns, which then disperse the load to the ground.</p></div>

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

Q: Does steel framing increase home value?

• <div><p>Using a steel frame may raise the value of your home. Steel is more heat resistant, has better longevity, and doesn&rsquo;t need any upkeep compared to traditional wood. You can also customize a steel build a little easier than other materials like brick, concrete, and vinyl&mdash;which have trouble bending and adapting to renovations.</p></div>

Q: What factors affect custom metalwork costs?

• <div><p>Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Crockett, CA?

Select your specific project to find the pro for you.

Find Welders in Crockett

Fence Dr.

4.78(

)

•Approved Pro

Fence Dr.

4.78(

)

•Approved Pro

Customers say: Quality work

Recommended by 100% of Angi customers

213 local quotes requested

Here at Fence Dr., family owned and operated since 1978, we have generations worth of experience and offer offer a variety of residential and commercial services from repair to replacement/ new installs of all style fences/gates, handrails, decks, mailboxes, garbage enclosures, removal/ disposal of existing structures, and much more. We aim to please. Superior service, premium pricing, and top quality craftsmanship is guaranteed. Please contact for any and all inquiries into past, current, and future projects. Cslb# 837254 Email- [email protected] Phone- (925)432-6347 Text- (925)334-9958 Web- www.fencedr.org

"I hired Fence Doctor to repair a few sections of my fence that was damaged during the winter storm. Got a few estimate, one was 30% lower than Fence Dr, but ultimately decided to go with Herb since he seems to know fences really well, and was able to explain things. Pros: - He and his crew are excellent at doing their work, fast and efficient and cleaned up after themselves - Really like the newly installed fence sections Cons: - He pushed out the installation date 3 times due to various reasons, and told me the day before he needed to change the date - His initial quotes didn't match what he told me verbally, resulting in delays to begin the work. Overall, I'm satisfied with the work Herb and his crew from Fence Dr did, and will recommend his service."

Lu W on June 2023

"I hired Fence Doctor to repair a few sections of my fence that was damaged during the winter storm. Got a few estimate, one was 30% lower than Fence Dr, but ultimately decided to go with Herb since he seems to know fences really well, and was able to explain things. Pros: - He and his crew are excellent at doing their work, fast and efficient and cleaned up after themselves - Really like the newly installed fence sections Cons: - He pushed out the installation date 3 times due to various reasons, and told me the day before he needed to change the date - His initial quotes didn't match what he told me verbally, resulting in delays to begin the work. Overall, I'm satisfied with the work Herb and his crew from Fence Dr did, and will recommend his service."

Lu W on June 2023

New Generation Welding and Fabrication LLC

5.00(

)

•Approved Pro

New Generation Welding and Fabrication LLC

5.00(

)

•Approved Pro

63 local quotes requested

3 years of experience

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job. Over 12 years experience

"New Generation was amazing. I requested help with a small welding job on a broken garage door hinge and they responded right away. After requesting pictures I was quoted a fair and reasonable price and they said they could come that same afternoon and do the welding on site. Arrived early and after looking saw there was another small crack which they said they would address as well but did not increase the charge. They fixed the broken garage door hinge and when installed everything works smoothly. Job well done. Will use again if need arises and would highly recommend. "

Trish W on June 2025

"New Generation was amazing. I requested help with a small welding job on a broken garage door hinge and they responded right away. After requesting pictures I was quoted a fair and reasonable price and they said they could come that same afternoon and do the welding on site. Arrived early and after looking saw there was another small crack which they said they would address as well but did not increase the charge. They fixed the broken garage door hinge and when installed everything works smoothly. Job well done. Will use again if need arises and would highly recommend. "

Trish W on June 2025

Get matched with top welders in Crockett, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Crockett, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Find Welders in Crockett

Fence Dr.

Fence Dr.

New Generation Welding and Fabrication LLC

New Generation Welding and Fabrication LLC

None

None

Gann Welding & Fabrication

Gann Welding & Fabrication

Acuna Ironworks

Acuna Ironworks

Diazz Welding

Diazz Welding

Price family remodle

Price family remodle

Juarez Mobile

Juarez Mobile

East Bay Services

East Bay Services

All Metals Welding

All Metals Welding

The Crockett, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in Crockett? Check surrounding areas for Welders.

Which Welding task are you tackling?Find Crockett Welding services on Angi who specialize in any of these tasks