Get matched with top pressure washers in Carpinteria, CA

Experts agree that spring and fall are the best times to pressure wash a home's exterior due to the milder weather. Aim to schedule the project once a year during a warm, dry season, typically between March and November, depending on your local climate. Many prefer the spring to clean away dirt and grime that has gathered over the winter, preparing the house for the rest of the year. You can always perform touch-ups in the summer or fall as needed.

Whether you need to winterize your pressure washer depends on where you store it. If you can keep it in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, if the machine will be stored in freezing temperatures, any liquid left in the water pump can freeze, expand, and cause severe damage. To prevent this, add antifreeze to keep it in good condition. While some suggest emptying the machine with compressed air, this can be a tedious process that may not fully drain the liquid. Regardless of storage conditions, it is also good practice to empty the gas chamber and refresh the oil before winter storage.

While it can be a good idea to learn how to pressure wash brick to remove oils, algae, and debris from the surface, pressure washing isn't a good option for getting rid of white stains on brick. While you may get good temporary results, pressure washing can actually make efflorescence worse once the brick dries because the process pushes salt deeper into the brick. In addition, the intensity of pressure washing can damage brick.

On average, pressure washing a house can take anywhere from 30 minutes to three hours. The time frame to pressure wash or power wash your home, fence, or other property depends on the size of the project and the complexity and accessibility of the areas that need cleaning. Part of the time required to complete the job includes setup and removal of equipment needed. A two-story house with a steep roof may require working from scaffolding or a ladder, likely adding to the time required to finish the project.