Get matched with top drain cleaners in Bradbury, CA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If you leave liquid drain cleaner for too long, it will start breaking down your drainpipes. The chemicals in these cleaners can cause cracks, corrosion, and leaks in your pipes. They can also damage plumbing fixtures and even cause environmental damage if left too long without rinsing away.

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

No. You should dispose of all oil-based finishing products through a local hazardous waste program. Not only can oil-based finishes be hazardous for the environment if disposed of in the sink, but they can cause clogs in your pipes and stop up your drains. Most municipal garbage or waste disposal companies have a specific location or pick-up schedule for hazardous materials, so that’s your best bet to get rid of excess finishing products.