Top-rated concrete resurfacing pros.

Get matched with top concrete resurfacing pros in Snowflake, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete resurfacing project in Snowflake, AZ?

Select your specific project to find the pro for you.

Find Concrete resurfacing pros in Snowflake

Concrete Resurfacing questions, answered by experts

Pervious concrete should be between 4 and 8 inches thick to drain water properly. Surfaces like parking lots and driveways should be at least 6 inches thick to accommodate the weight of vehicles, while patios and walkways may be poured between 4 and 6 inches thick. There’s no standard for pervious concrete thickness, but in most cases, the more weight the surface will need to hold, the thicker it should be.

The average cost to repair a concrete driveway ranges from approximately $830 to $2,800, with a typical project costing around $1,765. The price varies widely depending on the type and extent of the damage. Minor crack repairs can be as low as $0.10 to $0.15 per linear foot and may be a DIY project. More significant repairs are priced per square foot: replacing a damaged slab costs about $6 to $14, while raising or leveling sunken concrete costs $3 to $25. Resurfacing is another option, costing around $3 to $5 per square foot. Factors influencing the total price include the size of the affected area, whether reinforcement is needed, and labor costs.

Yes, you can pour new concrete over old concrete, but you need to apply a concrete bonding agent to the existing concrete to ensure the new concrete sticks. Keep in mind that even with a bonding agent, large cracks and other flaws will still come through. If the concrete has heaved, settled, or cracked, pouring new concrete on top won’t address any root structural problems. Removing the existing concrete and rebuilding will be your best solution in that case.

Yes—as long as the area has been properly prepped. Different self-leveling brands and compounds have their own specific instructions for preparation; some may require that you add primer or grind the surface. Without proper preparation of the surface, the compound will not be able to fully bond to the concrete and fill the cure as a separate layer, which makes it prone to chipping.

If there is standing liquid on your concrete, remove it before attempting any of the above cleaning methods. For small amounts of water, use rags, a bucket, and a mop. For larger areas of liquid, lay down cat litter or baking soda to soak up the water first. If you have extremely large pools of water sitting on your concrete, break out the wet vac and get to work.

The Snowflake, AZ homeowners’ guide to concrete resurfacing

From average costs to expert advice, get all the answers you need to get your job done.