Get matched with top bathtub restoration pros in Morenci, AZ

For a standard-sized bathtub with minor damage, it takes approximately 3 to 5 hours to refinish. It might take a bit longer if your bathtub refinishing contractor needs to fill in significant cracks or gouges. This is the same if you have a specialty tub, like an oversized bathtub—you can expect your pro to take a bit on the longer side.

Costs vary by materials used, surface size, and complexity. Refacing can be cost-effective compared to full replacements, with an average range between $300 and $1,200.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Rust in your bathtub occurs when iron in the water or on metal components in your tub are exposed to oxygen, but while it’s unsightly, it won’t make bathing dangerous. However, if the rust appears under or around your tub spout or shower head, it could indicate that you have high levels of iron in your water. Drinking water with small amounts of iron in it usually doesn’t pose a health risk, but you might want to consider installing a water softener. The presence of iron could indicate that you have hard water, which can create some plumbing issues.