Top-rated fireplace pros.

Get matched with top fireplace pros in Houck, AZ

Enter your zip and get matched with up to 5 pros

Need a pro for your fireplace service project in Houck, AZ?

Select your specific project to find the pro for you.

Find Fireplace pros in Houck

Avatar for Frontpoint
Frontpoint
4.7(
8,819
)
Clean and Inspect a gas fireplaceClean and Inspect a wood burning stove or pellet stoveClean and Inspect a wood fireplace chimney

Serving Houck, AZ and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"It's a pretty decent system, I think. They send you the pieces and you install them yourself, which is pretty easy. The only real problem I have is that one sensor is too far away from the panel...or there's some interference, and they haven't been able to fix that. It's an interior door, so it's not the end of the world, just a little annoying. Their customer service is pretty good though. Nice, smart customer service people on the other end, very polite and helpful."
Recommended by93%of homeowners
Fireplaces questions, answered by experts

Modern gas fireplaces are relatively efficient and don't burn excessive amounts of gas, especially compared to older models. A gas fireplace might use between 10,000 to 40,000 BTUs per hour; the total amount of gas used depends on the fireplace's size, heat output, and how often it's in use. To help keep your running costs down, consider using a thermostat and turning off the fireplace when not needed to minimize gas consumption

Yes, you can put a freestanding one in a corner if you’re tight on space. Because pellet stoves don’t get as hot as other types of wood stoves, there only needs to be 3 inches of clearance from the wall on each side. Placing it in a corner should not impact the ventilation—you’ll still need to follow safety precautions by not installing too close to a window. Typically, it’s 4 feet from a window or 18 inches if the stove uses an external air source for combustion. Always check the owner’s manual for specific instructions.

The cost to replace a chimney damper ranges from $160 to $520, depending on the type of damper and the complexity of the installation. If you're looking to repair an existing damper, expect to pay around $100 and $225, depending on the extent of the damage and your location. Hiring a professional ensures proper installation or repair, which can help maintain energy efficiency and prevent drafts, making it a worthwhile investment for long-term savings.

Costs depend on stove type, venting complexity, and additional features like hearth pads or decorative finishes.

Wood is classified as either hardwood or softwood. For firewood, hardwoods are generally the best choice as they tend to burn longer, hotter, and produce less smoke than softwoods. Recommended hardwoods include oak, hickory, maple, cherry, ash, beech, birch, elm, and walnut. Oak is a particularly good option as it's widely available, slow-burning, and doesn't produce much smoke or sparks. Some woods, like oak, hickory, and cherry, also emit a pleasant scent. It is best to avoid softwoods such as eucalyptus, poplar, and willow, as they create a lot of smoke and have a high moisture content that makes them difficult to light and burn efficiently.

The Houck, AZ homeowners’ guide to fireplace services

From average costs to expert advice, get all the answers you need to get your job done.