Best siding pros near Judsonia, AR

The cost to install or replace brick or stone siding generally ranges from $10 to $50 per square foot. The final price depends on several factors, including the specific material type, local labor rates, and any necessary preparation work, such as removing old siding. For example, different types of stone have varying costs per square foot: natural stone ($4.50–$35), stone veneer ($11–$13), faux stone ($6–$9), and cultured or manufactured stone ($5–$8).

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.

You may only need to repaint fiber cement siding every decade or so, but you should clean it every six to 12 months, depending on your local climate. First, wash with a garden hose or similar low-pressure device (not a high-pressure washer, which can damage the material) to remove dirt and any large debris. Then, gently wipe down the surface with a soft brush or cloth in a side-to-side motion, following the grain of the fiber cement.

You can calculate the required square footage of siding you need by measuring the height and width of your home’s rectangular exterior walls. For the triangular-shaped gable walls, measure the height from the ground to the tallest gable point to make sure you have enough for good coverage. Once you have combined the totals for each wall, add another 10% to account for wasted materials. It’s also good to have extra siding on hand to tackle wood siding repair down the road.