Get matched with top siding pros in Holland, AR

Traditional clapboard siding, particularly with panels made from wood, is not a significant insulator on its own. However, you can keep your home cooler in summer and warmer with "insulated clapboard siding," which is a type of vinyl clapboard siding with a built-in foam insulation. Consult a local siding contractor to determine whether insulated siding is right for your home.

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.

Mildew grows into porous wood, making it more difficult to remove than regular dirt (and more destructive). We suggest using a dedicated mildew and mold fungicide to remove mildew, which is found in any local home improvement store. Apply a dose of the fungicide to the siding and leave to work according to the instructions, usually for an hour or two. Then wash it thoroughly away and scrub the spot again. Repeat the process if necessary. If nothing is removing the mildew stains, you should plan on removing those clapboard planks in time, as their damage could cause future problems.

There should be small gaps between your roof and the walls of your home, and other buildings. These small gaps let building materials shift, expand, and contract with weather and other outside forces, and they prevent moisture from wicking down walls from roofing and gutter systems. Without these strategic gaps, your home’s exterior and its finishes can sustain water damage, decay, peel, delaminate, and crack. However, there is a fine line between a smart gap and a problematic gap—all  gaps should be small, intentional, and covered or filled in with foam insulation to prevent pests from using them as access points.