Get matched with top pool and spa technicians in Johnson, AR

Properly maintaining your hot tub will prevent serious issues from occurring down the road. You should replace the filter once a year, regularly look for and repair small cracks in the shell, and test the water quality every few months. You can do this yourself for less than $100 per year.

You can also hire a hot tub service to service your hot tub annually to identify problems early, which could save you money in the long run. They cost about $100 to $200 per call.

To refill a hot tub after winter, start by opening up the tub and giving it a quick cleaning. If you use antifreeze, drain out the water then grab a hose and thoroughly clean the tub shell out, spraying water into each jet of the tub. 

Reconnect the hot tub and turn the power back on. When it’s time to fill the tub again, insert the hose into the filter well (if available). Avoid trapping too much air in the water lines, which can cause the pump to lock up when it starts again. Add the necessary chemicals and start the heating process. It will take some time—most of a full day—for the water to heat up again.

Hot tub maintenance can cost between $500 and $1,000 annually. These costs typically cover deep cleaning the tub, refilling it several times a year, and maintaining the water's chemical balance. While you can perform maintenance yourself, a professional can clean and treat your hot tub with chemicals to save you time. The biggest expenses are often heating and repairs, but regular maintenance can help you avoid more complicated and costly repairs and preserve your investment.

Yes, hot tubs can use a significant amount of electricity, primarily to keep the water heated. A typical hot tub uses between 1,500 and 6,000 watts, and the pump can add another 1,500 watts. This usage can result in a monthly cost of around $20 to $30. The exact amount of electricity consumed depends on several factors, including the hot tub's age, size, heater voltage (120V vs. 240V), usage habits, and thermostat setting. Newer, energy-efficient models generally use less power than older ones. To reduce electricity costs, consider investing in an energy-efficient model, using a quality insulated cover with a thermal blanket, and keeping the filters clean.