Get matched with top stucco pros in Green Forest, AR

The average cost to repair stucco is about $1,600, with projects ranging from $250 for minor fixes to $6,700 for extensive work. The price is often calculated per square foot, typically costing between $60 and $120. Some professionals may charge an hourly rate of $40 to $50. The final cost depends on the extent of the damage, the type of stucco, your home's location, and whether there is underlying damage that also needs to be addressed.

Costs for specific repairs vary:

• Cracks: $8–$20 per square foot

• Holes: $250–$450 per hole

• Water damage: $30–$50 per square foot

• Chimney repair: $60–$120 per square foot

• Recoating: $4–$5 per square foot

While you may be able to patch small cracks yourself, it is recommended to call a professional for major repairs to ensure the job is done correctly.

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

Stucco applied over brick can last 30 to 50 years or more when correctly applied and properly maintained. Stucco’s lifespan can be shortened by improper application, incorrectly mixed material, lack of preparation before application, and lack of maintenance. To get the most life out of your stucco siding, keep up with maintenance and repair any damage as soon as you discover it. 

Solid, unpainted stucco shouldn’t suffer damage from dots of glue used for this task. If the stucco is dirty, you may notice slight marks when you heat and peel the glue away, but these aren’t permanent.

However, not all stucco walls are solid stucco. Some are “faux” stucco with a foam backing. This kind of stucco veneer is more susceptible to damage, including damage from hot glue. We don’t suggest attaching anything to these kinds of stucco walls, so make sure you check the stucco type before starting this project.