Best pressure washers near Altheimer, AR

Brick takes longer to dry than less porous materials like concrete. If you are waiting to spot clean, a full day of mild weather should do the trick. If you are waiting to paint or apply a finish or sealant, give it three to four days to ensure the brick is absolutely dry as a bone. You don’t want any residual moisture whatsoever before laying down paint or sealant. 

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Cedar shake siding requires regular cleaning, or else it will grow mold and algae. However, a pressure washer can easily damage your cedar shakes if the water pressure is too high. We recommend cleaning with a garden hose instead. Review our guide to cedar siding maintenance if you’ve just finished your installation.

Powerwashing services for businesses typically range from $200 to $1,500, depending on surface size, level of grime, and cleaning methods. Heavily stained or high-rise buildings may require additional labor and equipment.