Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Tanner, AL

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Tanner, AL?

Select your specific project to find the pro for you.

Find Metal fabricators and restorers in Tanner

Avatar for Masterpiece Builders

Masterpiece Builders

PO Box 41
4.71(
14
)
Approved Pro

Masterpiece Builders

PO Box 41
4.71(
14
)
Approved Pro
Customers say: Quick response
3 years of experience

*Bypass the hassle! Call (256) 559-2825 to talk directly to a real person! *Want a job that lasts - a masterpiece? We build the quality most don't have time for. Looking for a pro you can trust - as well as their knowledge? We do it right the first time - saving you money and problems. Affordable... yet committed to leaving you impressed! *Your choice of financing available

"Did a horrible job. David uses low quality wood, screws are missing and unevenly placed, boards are warping badly after 2 months, uses wrong gate hinges and stained wood way too early (1 coat) causing fading and sticky sap. I HIGHLY don?t recommend this dude!!!!"

Tara S on July 2025

*Bypass the hassle! Call (256) 559-2825 to talk directly to a real person! *Want a job that lasts - a masterpiece? We build the quality most don't have time for. Looking for a pro you can trust - as well as their knowledge? We do it right the first time - saving you money and problems. Affordable... yet committed to leaving you impressed! *Your choice of financing available

"Did a horrible job. David uses low quality wood, screws are missing and unevenly placed, boards are warping badly after 2 months, uses wrong gate hinges and stained wood way too early (1 coat) causing fading and sticky sap. I HIGHLY don?t recommend this dude!!!!"

Tara S on July 2025


Southern Mobile Welding Repair and Services

3506 Highway 20
5.00(
6
)
Approved Pro

Southern Mobile Welding Repair and Services

3506 Highway 20
5.00(
6
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
9 years of experience

Southern Mobile Welding Repair and Services is committed to excellence every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

"Excellent Work!"

Curtis D on September 2023

Southern Mobile Welding Repair and Services is committed to excellence every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

"Excellent Work!"

Curtis D on September 2023


Avatar for Simmons Welding & Fab

Simmons Welding & Fab

No reviews yet

Simmons Welding & Fab

No reviews yet
1 years of experience

I'm a welder I've been in the trade for a little over 10 years services provided are tig welding stick welding mig welding and custom fabrication/repair. I can also do mechanical repair as well.

I'm a welder I've been in the trade for a little over 10 years services provided are tig welding stick welding mig welding and custom fabrication/repair. I can also do mechanical repair as well.


I specialize in small scale fabrication, mobile welding and repair. Stick, TIG, flux core, Oxy Acetylene, Plasma cutting, arc gouging, etc.



Avatar for 1 point USA

1 point USA

3033 Decatur Hwy
No reviews yet

1 point USA

3033 Decatur Hwy
No reviews yet
14 years of experience

We offer on site or off site metal fabrication, welding and repair. including but not limited to handrails, walk gates, drive gates and railings. We can design and build new to suit your needs, modify existing and we also offer repair for existing gates, handrails and railings, ETC.

We offer on site or off site metal fabrication, welding and repair. including but not limited to handrails, walk gates, drive gates and railings. We can design and build new to suit your needs, modify existing and we also offer repair for existing gates, handrails and railings, ETC.


L&L Repairs and Remodeling

Based Out Of
1.00(
1
)

L&L Repairs and Remodeling

Based Out Of
1.00(
1
)

We guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality of work we provide, while delivering great customer service! Check out all the services we offer below and call -or- click to schedule an estimate today!

"I hired him to install the new toilet, take out the old toilet and install the new one because the old toilet was leaking so it was supposed to be two and half hour job and he was about six and half hours trying to install the toilet and when he left, he said that it was installed properly but it was not, the toilet was unstable. That means, when you shook the toilet, it shakes from side to side and it was leaking. So, I had to literally turn the water off and drain the toilet and call another plumbing company who are here now to install it correctly and we reinstalled it correctly. I would not recommend this plumber and service guy to anybody and would also highly recommend Angie to remove him from your list of providers."

Kerry W on January 2025

We guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality of work we provide, while delivering great customer service! Check out all the services we offer below and call -or- click to schedule an estimate today!

"I hired him to install the new toilet, take out the old toilet and install the new one because the old toilet was leaking so it was supposed to be two and half hour job and he was about six and half hours trying to install the toilet and when he left, he said that it was installed properly but it was not, the toilet was unstable. That means, when you shook the toilet, it shakes from side to side and it was leaking. So, I had to literally turn the water off and drain the toilet and call another plumbing company who are here now to install it correctly and we reinstalled it correctly. I would not recommend this plumber and service guy to anybody and would also highly recommend Angie to remove him from your list of providers."

Kerry W on January 2025


Avatar for Alabama Welding and Finishing LLC

Alabama Welding and Finishing LLC

24 CR-901
No reviews yet

Alabama Welding and Finishing LLC

24 CR-901
No reviews yet
Free onsite estimate

Veteran owned and operated small business based in Jemison, AL specializing in welding repairs, fabrication services, heavy equipment repair, large-scale painting, residential steel staircases, epoxy floors and countertops, slip resistant garage floor coating, awnings, fire pits, BBQ smokers and grilling racks and much more! We offer a variety of services that can't be matched when it comes to craftsmanship and professionalism. Our simplistic view of delivering exactly what our customers need as quickly and efficiently as possible, without sacrificing craftsmanship is what sets us apart from the rest so give us a call and let us do it right, the first time!!

Veteran owned and operated small business based in Jemison, AL specializing in welding repairs, fabrication services, heavy equipment repair, large-scale painting, residential steel staircases, epoxy floors and countertops, slip resistant garage floor coating, awnings, fire pits, BBQ smokers and grilling racks and much more! We offer a variety of services that can't be matched when it comes to craftsmanship and professionalism. Our simplistic view of delivering exactly what our customers need as quickly and efficiently as possible, without sacrificing craftsmanship is what sets us apart from the rest so give us a call and let us do it right, the first time!!



Huntsville Mobile Sandblasting is a licensed and insured company located in the Southern Huntsville, Alabama area. Currently, the owner does the work himself to ensure quality and reliability. All estimates are free!

Showing 1-10 of 33
Metal Fabrication and Restoration questions, answered by experts

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

  • Metal furniture repair: $35–$100

  • Pipe repair: $200–$1,000

  • Small gates: $550–$750

  • Fencing: $1,200–$1,800

  • Fabricated sheet metal welding: $750–$2,500

The best tool for cutting metal ducts depends on the duct's shape and thickness. For round ducts, a duct cutter provides accurate, clean cuts. Reciprocating saws equipped with metal-cutting blades are versatile and suitable for both round and rectangular ducts. They offer speed and precision, especially for thicker metal. 

Tin snips are handy for intricate cuts or smaller ducts. However, an angle grinder with a metal-cutting wheel is powerful and efficient for large or thick metal ducts. 

Yes, an LVL beam is more affordable than the cost of a steel I-beam, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists.

With the right tools, DIY sheet metal repair can be done for small, non-structural issues, but larger repairs usually require the involvement of an experienced technician.

Storing brass properly, cleaning it regularly, avoiding excess handling, and making sure to only use gentle, non-abrasive cleaning materials can all help extend the life of brass. Storing little-used brass items in airtight, water-tight containers will help prevent oxidation and water damage. For more frequently used items, try not to handle them frequently with bare hands, clean them when they begin showing signs of oxidation or tarnish, and avoid harsh, abrasive cleaners or tools.

The Tanner, AL homeowners’ guide to metal fabrication and restoration services

From average costs to expert advice, get all the answers you need to get your job done.