Get matched with top locksmiths in Northport, AL

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

Deadbolts are solid and durable as can be, but the pin and tumbler can still be forced open, thus making this type of lock susceptible to picking. Most types of deadbolts are harder to pick than a traditional spring-based lock, though. It requires a specialized lock pick and a tension wrench to align all of the pins, thus unlocking the door. 

Newer, electric-powered door locks generally have a life span of five years or less. That’s thanks, in large part, to a phenomenon called planned obsolescence, in which products are programmed to need replacing after a certain amount of time. That’s also why older, manual, push-key locksets can last up to 30 years with regular cleanings and maintenance. When it does come time for a new set-up, know that the cost to change locks ranges from $130 to $500 on average.

If you’re having an issue turning the key inside a lock, chances are there is dust or dirt buildup within the cylinder. The easiest solution is applying a dry lubricant to the lock, which loosens the dirt buildup. You may need to turn the key a few times for it to work properly again.