Get matched with top locksmiths in Headland, AL

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

If you’re having an issue turning the key inside a lock, chances are there is dust or dirt buildup within the cylinder. The easiest solution is applying a dry lubricant to the lock, which loosens the dirt buildup. You may need to turn the key a few times for it to work properly again.

Rekeying should be done when employees leave or keys are lost, while replacement may be necessary for outdated or damaged locks.

There are many types of deadbolts, but these tips work on most. First, address any grime buildup. A bit of WD-40 will loose up rust and dirt so the deadbolt can turn. Inspect the door and frame alignment if this doesn't resolve the issue. Adjust the strike plate or the deadbolt's position to improve alignment. If the problem persists, disassemble the lock to inspect for damaged or worn parts. If you are unsure how to do it, hire a local locksmith.