Best fencing pros near Greensboro, AL

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.

You can use a few different tactics to prevent your deck gate from sagging. Aside from using strong, rot-resistant woods, introducing a diagonal element—such as a tension rod or solid piece of wood to act as a brace—across the gate will offer better support. You can also use rigid joists to prevent the gate from sagging.

The average cost to install a wrought iron fence is around $3,150, with typical project costs ranging from $470 to $10,500. The final price can vary significantly based on several factors, including the fence's total length and height, design complexity, metal thickness, and your property's topography.

For materials alone, you can expect to pay around $25 to $35 per linear foot. When including installation, the cost is typically between $50 and $70 per linear foot.

Additional factors that can influence the total cost include:

• Custom designs, decorative flourishes, gates, and columns

• Labor costs in your area

• The need for permits

• Land preparation, such as old fence removal, tree or bush clearing, and land grading

For an accurate estimate, it is best to consult a professional fence installer with the specific measurements and design requirements for your project.

Silt fences are very effective when installed correctly and used in proper locations. However, there are places where they don’t work as well. This includes property with a concentrated water flow, where runoff could pool or cause a flooding hazard. You’ll also want to use caution when installing in areas susceptible to landslides. Your contractor will follow state guidelines and know when an alternate solution is more effective.