Get matched with top sink installation pros in Buhl, AL

If you have the patience and help to install a kitchen sink, you can do it yourself. This DIY project works best when replacing a sink that fits the existing hole, and the fittings and plumbing are in good condition. If you're worried about the plumbing's condition or aren't sure how to shut the water and power off to the garbage disposal and dishwasher, it's best left to a sink installation pro.

No, you don’t need to use plumber’s putty to install a sink drain. Other options are available, such as silicone putty or silicone caulk. Plumber’s putty is the traditional method and it’s easier to work with and easier to remove. It doesn’t need to dry before using. Silicone putty should dry before you use the drain.

Yes, you can fit a vanity unit to an existing sink, especially if you plan to custom-build the vanity. With a prefabricated vanity, you’ll likely need to make a few adjustments. It depends on the type of sink, the size of the sink, and the existing plumbing. If you plan to retrofit a sink into a prefabricated vanity, make sure you take precise measurements and that your sink is compatible with the vanity you select. Prefabricated units have a precut sink hole, so you’ll need the size to match your sink.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.