Get matched with top plumbers in Berry, AL

The clearest sign that something is wrong with your galvanized piping is if you can see rust or corrosion on the exterior. These indicate that the same problems are present on the inside of the pipes. You should contact a licensed plumber right away so that they can inspect your pipes. Other signs include poor performance of your gas appliances, high gas bills, and if your pipes are past the lifespan of 20 to 50 years.

The time it takes to install or replace a faucet depends on the complexity of the job. A plumber can typically replace a kitchen faucet in 30 minutes to one hour. A standard installation often takes a plumber one to two hours, which is a similar amount of time for an experienced DIYer performing a simple replacement. However, the job can take much longer if there are complications. For example, if the plumbing system needs modifications, or if you are installing a wall-mounted or freestanding model that requires opening up walls or flooring to run new plumbing, the project could take as long as seven to eight hours for a professional to complete.

If your bathtub won’t drain, it’s usually due to a clog. You can try to remove any visible debris by hand. For debris stuck in the trap below the drain, a drain snake is your best bet. Keep in mind that chemical drain cleaners can be very effective for hair clogs, but they’re corrosive and can damage your pipes. Use with caution. 

You could be smelling sewer gas in your kitchen because of a dry P-trap, clogged vent pipe, or leaking plumbing seals. If you smell a rotten egg odor, check your sink’s P-trap and plumbing connections first. A clogged or damaged vent pipe can trap sewer gas and push it back into your kitchen through the plumbing pipes. Loose or deteriorated seals around drainpipes can also allow sewer gas to leak out. If you can’t find the source, call a local plumber for expert help.