Get matched with top woodworkers in Addison, AL

There are several mistakes you should avoid when using butcher block countertops. Don't place hot pots or pans directly on the surface, as this can crack the wood and cause permanent damage. Avoid leaving wet items sitting on the surface, and wipe up liquids as soon as possible to avoid stains.

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

Whether or not it’s easier to cut wood when it’s wet versus dry depends largely on the type of tool you use and the wood you’re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw. 

However, you might want to avoid cutting wood entirely when it’s wet if you’re pruning your tree. Sawing a wet tree that you don’t plan on removing can also encourage bacterial and fungal growth and decay.

Wooden soffits, when properly cared for, can last between 10 and 25 years, depending on the type of wood and the climate you live in. Certain wood types will last longer than others, and you might want to consider the cost of replacing soffits when you break down the total project cost. While an initially higher-priced material might seem counterintuitive, it can make more financial sense if you don’t plan on moving.